Upgrading The Firmware - IRiver astell & kern AK100 User Manual

User Guide
Once files in the AK100 are deleted, they cannot be recovered.
Please back up all files before initializing the disk.

Upgrading the firmware

1. Use the Micro USB cable to connect the AK100 to
the USB terminal of the Internet connected computer,
and run iriver plus 4.
2. Select [Device - Update firmware], and update the
software according to the information window.
If the battery is low, software update may not be
completed.
Do not disconnect the AK100 from the computer while the
software update file is being downloaded.
Disconnect the Micro USB cable after download is
complete.
When the software of the AK100 is up to date, the latest
version will be shown on the information window.
If the software needs to be updated when the AK100 is
connected to the computer, the information window will be
displayed automatically.
12
Getting Started