Time Zone; Daylight Saving Time Indicator; 12-Hour Or 24-Hour Time Format; Set Time - La Crosse Technology 308-146 Instruction Manual

Time Zone

This forecast station offers seven time zones listed in letter format (default is EST):
1. EST will flash.
2. Press and release the +/RCC or -/°C/°F button to select a different Time Zone.
3. Confirm with the SET button and move to Daylight Saving Indicator.

Daylight Saving Time Indicator

DST will default to the ON position as most of the country observes the DST change. This should be in
the ON position all year long. If you live in an area does not observe the DST change, switch this to the
OFF position.
1. DST and ON will flash.
DST ON
2. Press and release the +/RCC or -/°C/°F button to turn DST to OFF.
3. Confirm with the SET button and move to 12/24 hour time format.

12-hour or 24-hour Time Format

The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.
Note: When in 12-hour format AM or PM will show in front of the hour.
1. 12H will flash.
12H
2. Press and release the +/RCC or -/°C/°F button to select 24-hour time.
3. Confirm with the SET button and move to Set Time.

Set Time

To set the time manually:
1. The hour digit will flash.
2. Press and release the +/RCC or -/°C/°F button to select the hour.
3. Press and release the SET button to set the minutes.
4. The minute's digit will flash.
5. Press and release the +/RCC or -/°C/°F button to select the minutes.
6. Confirm with the SET button and move to Set Calendar.

Set Calendar

To set the calendar:
1. The year will flash.
2010
2. Press and release the +/RCC or -/°C/°F button to set the year (between year 2010-2039).
3. Press the SET button again to confirm and to enter the month setting.
4. The month will flash.
5. Press and release the +/RCC or -/°C/°F button to set the month.
6. Press the SET button again to confirm and enter the date setting.
1 1
.
M D
7. The date will flash.
8. Press and release the +/RCC or -/°C/°F button to set the date.
9. Confirm all calendar settings with the SET button to confirm and exit the program menu.
Note: The day of the week will set automatically once the year, month and date are set.

Fahrenheit/Celsius

1. Press and release the -/°C/°F button once to switch from Fahrenheit to Celsius.
Model: 308-146/308146W www.lacrossetechnology.com/support 6