Installing Mlnx-Os® License (Cli); Installing Mlnx-Os License (Web); Mellanox Technologies Confidential - Mellanox Technologies Mellanox SX1018 User Manual

Table 10 - MLNX-OS Licenses
OPN
UPGR-6036F-56E
UPGR-1036-GW
UPGR-1036F-56E
UPGR-1024-GW
UPGR-1024-56E
LIC-fabric-inspector
2.4.1 Installing MLNX-OS® License (CLI)
 To install an MLNX-OS license via CLI:
Login as admin and change to Config mode.
Step 1.
switch > enable
switch # config terminal
Install the license using the key. Run:
Step 2.
switch (config) # license install <license key>
Display the installed license(s) using the following command.
Step 3.
switch (config) # show licenses
License 1: <license key>
Feature: EFM_SX
Valid: yes
Active: yes
switch (config) #
Make sure that the "Valid" and "Active" fields both indicate "yes".
Save the configuration to complete the license installation. Run:
Step 4.
switch (config) # configuration write
2.4.2

Installing MLNX-OS License (Web)

 To install an MLNX-OS license via CLI:
Log in as admin.
Step 1.
Click the Setup tab and then Licensing in the left side navigation pane.
Step 2.
Valid on product
SX6036
SX1036
SX1036
SX1024
SX1024
SX6036F/T/
SX65XX
If you do not save the installation session, you will lose the license at the next system
start up.

Mellanox Technologies Confidential

Description
56GbE link speed
InfiniBand, Ethernet L3, Gateway
56GbE link speed
InfiniBand, Ethernet L3, Gateway
56GbE link speed
InfiniBand fabric inspector monitoring and health.
Mellanox Technologies
Rev 1.6.9
20