Uconnect™ Phone - Chrysler 2012 Town & Country User Manual

Uconnect™ Phone
• To determine if your vehicle is equipped with Uconnect™ Phone, press the "Uconnect™
Phone" button
voice prompt. If not, you will see a message on the radio "Uconnect phone not available".
• The Uconnect™ Phone is a voice-activated, hands-free, in-vehicle communications
system with Voice Command Capability (see Voice Command section).
To access the tutorial, press the "Uconnect™ Phone" button
NOTE:
"tutorial". Press any hard-key/button or touch the display (Touch-Screen radio) to cancel the
tutorial.
• The Uconnect™ Phone allows you to dial a phone number with your mobile phone using
simple voice commands.
• Refer to your vehicle Owner's Manual on the DVD for further details.
The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth®
NOTE:
Hands-Free Profile, Version 1.0 or higher. For Uconnect™ customer support, call
1–877–855–8400 or visit www.chrysler.com/uconnect.
Phone Pairing
Pairing is a one-time initial setup before using the phone.
NOTE:
• Press the "Phone" button
• Wait for the "ready" prompt and BEEP.
• (After the BEEP), say "setup" or "Uconnect device setup".
• (After the BEEP), say "device pairing".
• You will then be prompted to give the phone pairing a name (each phone paired should
have a unique name).
• Next you will be asked to give this new pairing a priority of 1 thru 7 (up to seven phones
may be paired); 1 is the highest and 7 is the lowest priority. The system will only connect
to the highest priority phone that exists within the proximity of the vehicle.
• You will then need to start the pairing procedure on your cell phone. Follow the
Bluetooth® instructions in your cell phone Owner's Manual to complete the phone pairing
setup.
. If your vehicle has this feature, after a couple seconds you will hear a
to begin.
ELECTRONICS
• (After the BEEP), say "pair a device".
• Follow the audible prompts.
• You will be asked to say a four-digit
Personal Identification Number (PIN),
which you will later need to enter into your
mobile phone. You can say any four-digit
PIN. You will not need to remember this
PIN after the initial pairing process.
. After the BEEP, say
69