To Set The Ip/Mac Addresses Using The Ipmicfg Utility - Supero Embedded BMC/IPMI User Manual

C. Configuring IP and MAC Addresses using BIOS
1. Press the <Del> key at bootup to enter the BIOS Setup utility.
2. Select Advanced and press <Enter> to enter the Advanced menu.
3. From the Advanced menu, select IPMI Configuration and press <Enter>.
4. From the IPMI Configuration submenu, select Set LAN Configuration and
press <Enter> to set IP and MAC addresses.

To Set the IP/MAC Addresses Using the IPMICFG Utility

1. Run the ipmicfg utility from the bootable CD that came with your shipment.
2. Follow the instructions given in the Readme.txt file to configure Gateway IP/
Netmask IP addresses, to enable/disable DHCP and to configure other IPMI
settings.
IPMICFG Version 1.35 (Build 2010-04-28) Copyright 2010 Super Micro Computer,
Inc. Usage: IPMICFG Parameters (Example: IPMICFG -m 172.31.1.84)
-m
-m IP
-a MAC
-k
-k Mask
-dhcp
-dhcp on
-dhcp off
-g
-g IP
Chapter 2: Configuring BMC/IPMI Settings
Shows IP and MAC
Sets IP (format: ###.###.###.###)
Sets MAC (format: ##:##:##:##:##:##)
Shows Subnet Mask
Sets Subnet Mask (format: ###.###.###.###)
Gets the DHCP status
Enables the DHCP
Disables the DHCP
Shows Gateway IP
Sets Gateway IP (format: ###.###.###.###)
2-3