Software Installation - Steinberg NUENDO Audiolink 96 Mobile Operation Manual

5. Switch on the notebook and boot the operating system.
The small 15-pin connector of the CardBus card is coded. Only the sup-
plied special cable can be plugged in, and only when the metal sleeve is
up. Forcefully plugging in or out can cause damage to the CardBus card.

7. Software Installation

7.1 Windows 98
After the interface has been installed and connected to the Digiset or
Multiset (see page 12), and the computer has been switched on, Win-
dows will recognize the new hardware component and start its 'Add
New Hardware Wizard'. Insert the Driver CD into your CD-ROM drive
and follow the instructions on your computer screen.
Windows will install the Nuendo Audiolink 96 System driver and regis-
ter the card in the system as a new audio device. The Nuendo Audiolink
96 system is now ready for use.
Unfortunately, there are rare cases where the CD-ROM path (i.e. its drive-
letter) has to be typed in again during the copy process.
The Audiolink 96 system can be easily configured via its Settings dialog
(see page 27).
7.2 Windows 2000
After the interface has been installed and connected to the Digiset or
Multiset (see page 12), and the computer has been switched on, Win-
dows will recognize the new hardware component and start its 'Hard-
ware Wizard'. Insert the Driver CD into your CD-ROM drive and follow
the instructions on your computer screen. The driver files are located in
the directory \win2000 on the Driver CD.
Windows will install the Nuendo Audiolink 96 System driver and regis-
ter the card in the system as a new audio device. After a reboot the Nu-
endo Audiolink 96 system is ready for use.
NUENDO AUDIOLINK 96
English – 13