Setting-Up The Hd-3 For Left-Handed Use - Roland V-Drums Lite HD-3 Owner's Manual

Setting-up the HD-3 for Left-handed Use

The HD-3 lets you change the setup for left-handed use by exchanging the position of tom 3 and
the hi-hat.
1.
Disconnect the hi-hat and tom 3 cable, and detach the hi-hat and tom 3 from the
arms .
* For details on detaching and attaching the pads, refer to "Setup Guide. "
2.
Exchange the hi-hat and tom 3, and attach them to the arms .
* When attaching tom 3, make sure that the angle is correct.
3.
Reconnect the hi-hat and tom 3 cables .
• Hi-Hat (HH)
• Tom 3 (T3)
4.
Adjust the height of the hi-hat and tom 3 arms .
5.
Switch the settings of the pads for left-handed use .
As described in "Basic Operation in the Edit Screens" (p. 14), turn "L-R Exchange" ON.
Reference
"Exchange the pad settings for left-handed players" (p. 15)
Appendix
21