Show Lldp Neighbors - Brocade Communications Systems Brocade 6505 Command Reference Manual

2

show lldp neighbors

show lldp neighbors
Displays LLDP information for all neighboring devices on the specified interface.
Synopsis show lldp neighbors {interface tengigabitethernet slot/port | detail}
Operands interface tengigabitethernet
Defaults None
Command Privileged EXEC mode
Modes
EXEC mode
Description Use this command to display LLDP information for all neighboring devices on the specified
interface.
Usage If you do not use the interface tengigabitethernet operand, only the mandatory TLVs are displayed.
Guidelines
Examples To display detailed LLDP neighbor information on a specific interface:
174
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
detail Displays all the LLDP neighbor information in detail for the specified
interface.
switch#show lldp neighbors interface tengigabitethernet 0/8 detail
Neighbors for Interface Te 0/8
MANDATORY TLVs
===============
Local Interface: Te 0/8
Dead Interval: 120 secs
Chassis ID: 0005.1e76.1020 (MAC)
Remote Mac: 0005.1e76.102c
OPTIONAL TLVs
==============
Port Interface Description: Te 0/8
System Name: sw0
System Description: Fibre Channel Switch.
System Capabilities: Switching Routing
System Capabilities Enabled: Switching
Link Prim: 257
Remote Protocols Advertised:
Remote VLANs Configured: VLAN ID: 1
AutoNego Support: Supported Not Enabled
AutoNego Capability: 0
Operational MAU Type: 0
Link Aggregation Capability: Capable
Link Aggregation Status: Disabled
Port Vlan Id: 1
Remote Interface: Te 0/8 (IF Name)
Remaining Life : 100 secs Tx: 536
Multiple Spanning Tree Protocol
VLAN Name: default
Converged Enhanced Ethernet Command Reference
Rx: 535
53-1002508-01