Enabling Media And Devices For Multiboot - Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz Software Manual
Compaq notebook series
Hide thumbs
Also See for N800v - Evo Notebook - Pentium 4-M 1.7 GHz:
- Hardware manual (127 pages) ,
- Service manual (229 pages) ,
- Maintenance and service manual (221 pages)
Table of Contents
Advertisement
MultiBoot (Advanced Users Only)
Enabling Media and Devices for MultiBoot
By default, the notebook can start only from a bootable hard drive
or bootable drive medium in the notebook.
The notebook can start up from the following devices only if they
have been enabled for inclusion in MultiBoot:
■
NIC.
■
Hard drive inserted into an optional port replicator or
connected by USB.
■
Diskette in diskette drive inserted into an optional port
replicator or connected by USB.
■
Disk in SuperDisk drive inserted into an optional port
replicator or connected by USB.
■
CD-ROM, CD-RW, or DVD in optical drive inserted into an
optional port replicator or connected by USB.
To enable a device for inclusion in MultiBoot:
1. To open Computer Setup, turn on or restart the notebook,
then press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select the Advanced menu > Device
Options.
❏
❏
5–2
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
To enable bootable media in USB drives or in drives
inserted into a port replicator, select Enable USB legacy
support.
To enable a NIC, select Internal Network adapter boot.
F2.
F1.
Software Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the N800v - Evo Notebook - Pentium 4-M 1.7 GHz and is the answer not in the manual?
Questions and answers