IMPACT ACOUSTIC Chatpod 350 Assembly Instructions Manual
Hide thumbs
Also See for Chatpod 350:
- Assembly instructions manual (16 pages) ,
- Assembly instructions manual (12 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for IMPACT ACOUSTIC Chatpod 350
Summary of Contents for IMPACT ACOUSTIC Chatpod 350
- Page 1 45min Assembly instructions Chatpod 350...
- Page 2 Insert the supply cable and the 1.5m cable into the H-distributor until they click into place. supply cable 5m click cable 1.5m Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 3 Hold the sides until the top is assembled. Pin the top together with the sides, pull the cable through the top from the right side. click cable of the side Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 4 3 Insert the eight connecting rods. Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 5 4 Insert the wooden dowels into the holes. Join the two back panel elements and pull them together with the connectors. Do the same with the front elements. Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 6 Do the same with the front. Now tighten all the screws, which must be countered on the opposite side. M6 x 40mm Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 7 Remove the release paper of the double-sided tape and apply some additional glue dots with the installation glue provided. Make sure that the panels are completely flush with the top and side. Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 8 7 Screw the cable channel and the two brackets onto the table top. 4x16mm Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 9 Level and centre the table top and drill the holes for the table attachment in the back wall. A stepped drilling is necessary, first with a 7mm drill bit 6mm deep and then with a 5mm drill bit a total of 32mm deep. 7x35mm M6x12mm Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 10 7x35mm screws. Carefully loosen the cover of the socket. Connect the socket with the supply cable. Insert the socket into the hole. Align it and tighten it. Place the insert and snap the cover back into place. 7x35mm M6x12mm Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 11 Remove the four honeycomb cardboard blocks. Align the chatpod using the four leveling feets. Insert the plug as shown. Place the two outer panels on the cover. Plug the power cord into the socket. click Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)
- Page 12 3 mm hex key. Make sure that the handle is mounted with the pre-mounted square pin in the inside of the chatpod. Well done! Chatpod 350 Impact Acoustic AG, Bodenhof 4, 6014 Luzern (Switzerland)