Sealey AXL6.V4 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY SYMBOLS
WARNING fall from ladder.
Refer to instruction manual/booklet
Inspect the ladder after delivery. Before every use
visually inspect the ladder to check it is not
damaged and is safe to use.
DO NOT use a damaged ladder
Maximum total load
DO NOT use ladder on an unlevel or unfirm base
DO NOT overreach
DO NOT erect ladder on contaminated ground
Maximum number of users
DO NOT ascend or descend unless you are
facing the ladder
Keep a secure grip on the ladder when ascending
and descending. Maintain a handhold whilst
working from a ladder or take additional safety
precautions if you cannot.
© Jack Sealey Limited
STANDING LADDERS
MODEL NO'S: AXL6.V4, AXL8.V4, AXL10.V4, AXL12.V3, ASL3S.V3,
ASL5.V3, ASL7.V3, ASL2.V3, ASL23.V3, FSL5.V2, FSL7.V2, FSL10.V2,
APSL2, APSL3, APSL4
Original Language Version
Avoid work that imposes a sideways load on
ladders, such as side-on drilling through solid
materials.
DO NOT carry equipment which is heavy or
difficult to handle while using a ladder
DO NOT wear unsuitable footwear when climbing
a ladder
DO NOT use the ladder if you are not fit enough.
Certain medical conditions or medication, alcohol
or drug abuse could make ladder use unsafe
DO NOT spend long periods on a ladder without
regular breaks (tiredness is a risk)
Prevent damage of the ladder when transporting
e.g. by fastening and, ensure they are
suitably placed to prevent damage
Ensure the ladder is suitable for the task
DO NOT use the ladder if contaminated, e.g.
with wet paint, mud, oil or snow.
DO NOT use the ladder outside in adverse
weather conditions, such as strong wind.
For professional use a risk assessment shall
be carried out respecting the legislation in the
country of use.
When positioning the ladder take into account
risk of collision with the ladder e.g. from
pedestrians, vehicles or doors. Secure doors
(not fire exits) and windows where possible
in the work area.
WARNING, electricity hazard. Identify any
electrical risks in the work area, such as overhead
lines or other exposed electrical equipment and do
not use the ladder where electrical risks occur.
Use non-conductive ladders for unavoidable
live electrical work.
Standing Ladders Issue:1 26/07/23