Related Manuals for Kuvings AUTO10
Summary of Contents for Kuvings AUTO10
- Page 1 AUTO10 MANUAL Kuvings Hands-Free Slow Juicer Do not place parts in a dishwasher, dish dryer, microwaver, or under extremely hot water. PRODUCT INFORMATION...
-
Page 2: Table Of Contents
Do not remove drum lid or parts while juicer is in operation. HOW TO USE THE OPTIONAL STRAINER 13 Turn switch to OFF position after using juicer. Make sure the motor TROUBLESHOOTING Q&A stops completely before disassembling. SPECIFICATIONS Kuvings Hands-Free Slow Juicer AUTO10... -
Page 3: Safety Warning
Please do not store or operate the appliance near any heating appliance. • These instruction shall also be available in an alternative format. The appliance may become discolored or e.g on a website. www.kuvings.com deformed. Kuvings Hands-Free Slow Juicer AUTO10... -
Page 4: Parts
Smart Cap Juice Cup Pulp Cup Pusher Brush Juice Spout Base OPTIONAL Pulp Spout Smoothie Strainer Blank Strainer Coarse Strainer [OPTIONAL] [OPTIONAL] [OPTIONAL] Rotating Brush Citrus Maker Round Brush Pulp Mesh [OPTIONAL] [OPTIONAL] [OPTIONAL] [OPTIONAL] Kuvings Hands-Free Slow Juicer AUTO10... -
Page 5: How To Assemble
Turn the auto hopper clockwise until the sign for filtering the pulp. Place the pulp on the auto hopper is lined up with the lock mesh on top of the juice cup as shown mark on the drum. in picture . Kuvings Hands-Free Slow Juicer AUTO10... -
Page 6: How To Operate
* closed, the product will not work. Press the [FWD] switch to start operation. Set the switch to [STOP(O)] and stop the operation. Keep the juice cap open. If the smart cap is closed during extraction, the juice may flow backwards. Kuvings Hands-Free Slow Juicer AUTO10... -
Page 7: Ingredients Preparation
Do not extract extremely containing vegetable or fibrous or dry ingredients. at least 8 hours before juicing. Insert small amount with the liquids. Add ingredients animal oil. through the auto hopper hole in the hopper. Kuvings Hands-Free Slow Juicer AUTO10... -
Page 8: How To Disassemble
The base cannot be washed with water, so wipe it with a cloth containing a little moisture. Kuvings Hands-Free Slow Juicer AUTO10... - Page 9 The pulp outlet silicone is connected to the drum and cannot be separated completely. After washing, Insert the silicone completely into the groove. If the silicone part is not completely inserted, the amount of undiluted solution may flow out. Kuvings Hands-Free Slow Juicer AUTO10...
-
Page 10: How To Use The Citrus Maker
Press the FWD button to Cut the fruits in half and placing the drum set on start the citrus maker. press them gently on the base. the cone. ( The motor rotates the cone to extract the juice.) Kuvings Hands-Free Slow Juicer AUTO10... -
Page 11: Troubleshooting Q&A
Before assembling the parts, make sure the silicone parts are plugged in correctly. Kuvings Hands-Free Slow Juicer AUTO10... -
Page 12: Specifications
SPECIFICATIONS Product Juicer AUTO10, KSP-2529CE, KSP-2559CE, KSP-2529CB, KSP-2559CB, Model KHS-2520CE, KHS-2510CE, KHS-2520CB, KHS-2510CB Voltage AC220-240V, 50/60Hz Power Consumption 200W Maximum Use Less than 30 min Weight 7.2kg Dimension 210x253x472 mm Manufacturer NUC Electronics Co., Ltd. Type Low speed compression Origin...
Need help?
Do you have a question about the AUTO10 and is the answer not in the manual?
Questions and answers