Sealey APMS68 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
storage system.
Locate in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use storage on level and solid ground, preferably concrete.
‰
Keep the storage system clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use the storage system for any purpose other than that for which it is designed.
8
DO NOT use the storage system outdoors.
8
DO NOT place the storage system in a damp or wet location or an area where there is condensation.
8
DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
8
DO NOT move the storage system when there are items placed inside.
8
DO NOT step on the shelves.
8
DO NOT overload the storage system.
8
2. INTRODUCTION
APMS64/APMS68
Modular storage system ideal for any garage or workshop. Durable construction that will last for years. Easily adjusts to specific needs.
Purchase a simple base cabinet or create a full workshop storage system. All pieces are fully welded except Model No's APMS55 and APMS56
Floor Cabinets which require simple assembly.
APMS65
For use with Model No's APMS51, APMS52, APMS57, APMS59, APMS64 Floor Cabinets. Supplied with appropriate fixings to make integral
self-supporting unit, or use in conjunction with Model No. APMS50BP Back Panel and upright supports if part of a larger modular system. Two
door cabinet with a high quality lock supplied with two keys. Aluminium handles.
3. SPECIFICATION
Model No:................................................................APMS64
Overall Size: .........................................1360 x 460 x 910mm
Small Draw (x5): .......................................800 x 400 x 55mm
Medium Draw (x1): ..................................800 x 400 x 135mm
Large Draw (x1): .....................................1250 x 400 x 85mm
Cupboard: ...............................................510 x 620 x 420mm
Model No:............................................................... APMS65
Overall Size (W x D x H): ........................680 x 280 x 350mm
Model No:................................................................APMS68
Overall Size: .........................................1360 x 280 x 350mm
4. ASSEMBLY
© Jack Sealey Limited
1360MM MODULAR 7 DRAWER FLOOR
CABINET, 680MM 2 DOOR MODULAR WALL
CABINET, 1360MM MODULAR WALL CABINET
APMS64, APMS65,APMS68
MODEL NO:
Original Language Version
APMS64, APMS65, APMS68 Issue 1 21/12/2021
fig.1