Download Print this page

HP A10504 Product End-Of-Life Disassembly Instructions

Switch chassis
Hide thumbs Also See for A10504:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HP A10504 Switch Chassis(JC613A)
HP A10504 TAA Switch Chassis(JG820A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
6
0
0
0
0
0
0
0
0
8
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP A10504

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Tool Description Tool Size (if applicable) Screw driver 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: Unscrew the screws on mounting angle 2, and then remove mounting angle 2 from the chassis. Unscrew the screws on front panel 3, and then remove front panel 3 from the chassis.
  • Page 3 Treatments to the product (rear view) Figure 1 Treatments to the product (front view) Figure 2 Figure 3 Remove Part 16(rear view) Figure 4 Treatments to the product(rear view) Figure 5 Treatments to mounting angle 2 Figure 6 Treatments to front panel 3 Figure 7 Treatments to front panel 4 Figure 8 Treatments to blank panel 5 EL-MF877-00...
  • Page 4 Figure 9 Treatments to blank panel 12 Figure 10 Treatments to front panel 13 Figure 11 Treatments to fan frame 14 EL-MF877-00 Page 4 Template Revision B...

This manual is also suitable for:

A10504 taaJc613aJg820a