Panasonic WV-Q193 Operating Instructions

Operating Instructions
Included Installation Instructions
Base Bracket
WV-Q193
Model No.
WV-QJB501-W
⿟ Before attempting to connect or install this product, please read these instructions
carefully and save this manual for future use.
⿟ The external appearance and other parts shown in this manual may differ from the
actual product within the scope that will not interfere with normal use due to
improvement of the product.
⿟ For other languages of this manual, refer to our support website
(https://security.panasonic.com/training_support/documentation_
database/).
Panasonic i-PRO Sensing Solutions Co., Ltd. assumes no responsibility for
injuries or property damage resulting from failures arising out of improper
installation or operation inconsistent with this documentation.
For U.S. and Canada:
Panasonic i-PRO Sensing Solutions
Corporation of America
800 Gessner Rd, Suite 700 Houston, TX 77024
https://www.security.us.panasonic.com/
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada
1-877-495-0580
https://www.panasonic.com/ca/
© Panasonic i-PRO Sensing Solutions Co., Ltd. 2020
Caution:
⿟ Before attempting to connect or operate this product, please read these instructions
carefully.
Notice:
⿟ This equipment is not suitable for use in locations where children are likely to be
present.
⿟ Do not install this product in locations where ordinary persons can easily reach.
⿟ For information about screws and brackets required for installation, refer to the
corresponding section of this document.
Precaution
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause
fire, electric shock, injury, or damage to the product.
Be sure to consult the dealer.
When using this product, also read the "Precautions" described in the operating
instructions for the camera to be attached.
For Europe and other countries:
Panasonic Corporation
http://www.panasonic.com
Panasonic i-PRO Sensing Solutions Co., Ltd.
Fukuoka, Japan
Authorised Representative in EU:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Fs0520-0
Printed in China
Preface
Mount the camera onto the ceiling or wall using this bracket.
Use this bracket when conduits are used for wiring, or when there is no space available
for wiring in the ceiling or the wall.
For the latest information about the supported cameras, refer to our support website
(https://security.panasonic.com/support/info/ <Control No.:C0501, C0112>).
Specifications
Ambient operating temperature : –50 °C to +60 °C {–58 °F to +140 °F}
Dimensions : ø164 mm × 41.4 mm (H)
{ø6-15/32 inches × 1-5/8 inches (H)}
: Approx. 450 g {0.99 lbs}
Mass
Finish : Aluminum die cast
Precautions for installation
 I n order to prevent injury, the product must be securely mounted to the wall or
ceiling according to the Installation Guide of the camera.
 M ake sure to remove this product if it will no longer be used.
Standard Accessories
Operating Instructions (this document) ...................................................................... 1 pc.
Fixing screws for attachment plate (M4 × 8 mm {5/16 inches}) ............................... 5 pcs.
Template B (for the base bracket) ........................................................................ 1 sheet
Installation
Refer to the Installation Guide of the camera for details of how to install this
bracket.
For the latest information about the supported cameras, refer to our support
website (https://security.panasonic.com/training_support/support/info/ <Control
No.: C0503>).
WV-Q193 Light gray
WV-QJB501-W i-PRO white
(of them, 1 for spare)