1. safety
warning! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest
& Rollcab combination.
Locate the topchest & rollcab combination in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the topchest & rollcab combination clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
do not use the topchest & rollcab combination for any purpose other than that for which it is designed.
8
do not move the topchest & rollcab combination with drawers open.
8
do not open more than one drawer at the same time.
8
do not step on the drawers.
8
do not use in damp work areas.
8
warning! the warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations
that may occur. it must be understood that common sense and caution are factors which cannot be built into this product, but must be applied
by the operator.
2. assembly
1.
Lift the main rollcab body off
the base and topchest.
© Jack sealey Limited
instructions for
topchest & rollcab combination
13 drawer with ball bearing runners
ap2513b.V3, ap22513bb.V2
MoDEL no:
2.
remove the 4 screws on
the bottom of the topchest
assembly, then remove the
base from the bottom of the
topchest.
Original Language Version
3.
reattach the base to the
bottom of the rollcab ensuring
it is the correct way up and
secure with the supplied
fixings.
AP2513B.V3, AP22513BB.V2| issue 1 07/11/16