Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the speakers, you can enjoy high power music with vivid sound. What’s in the box Check and identify the contents of your package: Speakers (x2) Grille net + Frame (x2) Speaker wire (x2)
Page 4
Option 1: Mount on door (front or rear) You can mount the speakers on the front/rear door of your car. Note • Make sure that nothing obstructs around the mounting location of the door. • A hole for mounting may already be cut out of the inner panel of the door (front or rear).
Page 5
Remove the grille net. Strip the speaker wires and connect them to the amplifier. Black wire: connect to left speaker • Black (white lined): connect to right speaker • Right Amplifier Left Note • Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound quality. •...
Page 6
Mount on the speaker as shown below. Press and insert the edges of the grille net. • The speaker grille can be mounted without the grille net, if you like. Option 2: Mount on rear tray You can also mount the speakers into the surface of the rear tray. Follow the steps in section “Option 1: Mount in door”...
Note • Product information is subject to change without prior notice. Model Speaker type RMS power (Watts) Peak music power (Watts) Sensitivity (dB/W/m) Frequency response (Hz) 50-30kHz Impedance (ohms) Magnet mass (Oz) Model Speaker type RMS power (Watts) Peak music power (Watts) Sensitivity (dB/W/m) Frequency response (Hz) 40-30kHz...
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. Name of the Parts Pb, Lead...