Table of Contents
Advertisement
Quick Links
Installation and Wiring Instructions
Quiet Fan Conceal Range
QF100SX5CON
Manrose Quiet Fan Conceal X5 S
QF100TX5CON
Manrose Quiet Fan Conceal X5 T
QF100HTX5CON
Manrose Quiet Fan Conceal X5 HT
PLEASE READ THESE INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS.
PLEASE SAVE THESE INSTRUCTIONS.
220-240V~50Hz
IPX5
Advertisement
Table of Contents
Related Manuals for Manrose Quiet Fan Conceal X5 S
Summary of Contents for Manrose Quiet Fan Conceal X5 S
- Page 1 Installation and Wiring Instructions Quiet Fan Conceal Range QF100SX5CON Manrose Quiet Fan Conceal X5 S QF100TX5CON Manrose Quiet Fan Conceal X5 T QF100HTX5CON Manrose Quiet Fan Conceal X5 HT PLEASE READ THESE INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS. PLEASE SAVE THESE INSTRUCTIONS.
- Page 2 E. The Fan should only be used in conjunction with the appropriate Manrose products. F. The Fan should only be used in conjunction with fixed wiring. G. When the Fan is used to remove air from a room containing a fuel- burning appliance, ensure that the air replacement is adequate for both the fan and the fuel-burning appliance.
- Page 3 L. Stationary appliances not fitted with means for disconnection from the supply mains having a contact separation in all poles that provide full disconnection under over voltage category III, the instructions state that means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. M.
- Page 4 WIRING WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING THE INSTALLATION / OR MAINTENANCE IMPORTANT The fan should only be used in conjunction with fixed wiring. The cross - sectional area of supply cord used should be ranged from 0.75-1.5mm ...
- Page 5 SERVICING AND MAINTENANCE WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING MAINTENANCE. 1. At intervals appropriate to the installation, the fan should be inspected and cleaned to ensure there is no build-up of dirt or other deposits. 2.
- Page 6 Fig.3: QF100TX5CON & QF100HTX5CON 220-240V ~ 50Hz 3 AMP Fig.4: – Grille removal for cable entry To remove the outer cover, Carefully unclick and PCB control access. the cover from the 4 clips as shown below.(2) To Refit the cover, line up the 4 clips on the To remove the inner &...
- Page 7 Fig.6: QF100HTX5CON Humidity Adjustment To INCREASE SET POINT, turn the adjuster CLOCKWISE. This makes the controller LESS sensitive. To REDUCE SET POINT, turn the adjuster ANTI-CLOCKWISE. This makes the controller MORE sensitive. Humidity Adjustment Timer Adjustment To REDUCE the operating time, use a small screwdriver to turn the adjuster ANTI-CLOCKWISE.
- Page 8 Manrose Manufacturing Contact Information Unit 23, 53 Suttons Park Avenue Website: www.manrose.co.uk Earley email: sales@manrose.com Reading Sales hotline: 01753 691399 RG6 1AZ Technical hotline: 01753 876941 EU Authorised Representative: Manrose Bedrijvenweg 17 7442 CX Nijverdal Nederland authorisedrep@manrose.nl 496954 A 0621...
Need help?
Do you have a question about the Quiet Fan Conceal X5 S and is the answer not in the manual?
Questions and answers