Page 1
Instruction manual HE11, HE12, HE14, HE15L, HE16L, HE17, HE18 HB12, HB14, HB15L, HB16L 0123 1 Explanation of symbols See chapter 2. Safety Important information for the user Product can be sterilized in a steam sterilizer (Autoclave) Can be used in thermal disinfectors CE-mark –...
Page 2
→ Before storage, clean, maintain and dry the instrument according to the norm. Store in the CAUTION original packing, dry and dustproof. We recommend an annual check-up and maintenance of the entire spindle system by MK-dent or by MK-dent authorized personnel. 3 Product description This manual can be used for the following MK-dent products:...
Page 3
4 Putting into service and operation WARNING Risk of infection for patients and operator due to non-sterile instruments → Before the first and after each further use the instrument and the attachments must be processed and sterilized as defined in WARNING chapter 5 Processing according to ISO 17664.
Page 4
WARNING Risk of injury due to the use of worn out rotating instruments Rotating instruments can fall out while operating and thus injure the patient. WARNING → Do not use any rotating instruments with a worn out shaft. WARNING Risk of injury for the user due to rotating instruments Cuts and resulting infections may occur due to incorrect use.
Page 5
Dry with air or with a new soft cloth. Pre-check the glass rod before each use. In case of a damage of the glass rod do not operate and contact your dealer or the MK-dent’s repair service immediately.
Page 6
Repeat this process several times and clean the brush with water. Place the enclosed lubrication tool LT1014 on the MK-dent Premium Service Oil can and spray for approximately 2 seconds. If very unclean, repeat this process several times.
Page 7
MK-dent is not liable for defects and their consequences that have arisen whose arising may be due to natural wear, improper handling, improper cleaning, or maintenance, non-compliance with operating or manual instructions, calcination or corrosion, contaminated air and water supply or chemical or electrical influences that are unusual or not permitted according to MK-dent’s instruction for use or to other manufacturer‘s...