Advertisement
Quick Links
CLP-735, CLP-745, CLP-765GP,
CLP-775, CLP-785, CLP-795GP,
Firmware Update Guide
Preparing to update the firmware
Prepare a USB flash drive with enough free space.
1.
Use the list below to find the firmware file for your instrument, and then copy it to
2.
the root of the USB flash drive file system.
Product
CLP-735
CLP-745
CLP-765GP
CLP-775
CLP-785
CLP-795GP
Firmware File Name
CLP-735SETUP.PRG
CLP-745SETUP.PRG
CLP-765GPSETUP.PRG
CLP-775SETUP.PRG
CLP-785SETUP.PRG
CLP-795GPSETUP.PRG
Advertisement
Related Manuals for Yamaha CLP-735
Summary of Contents for Yamaha CLP-735
- Page 1 CLP-735, CLP-745, CLP-765GP, CLP-775, CLP-785, CLP-795GP, Firmware Update Guide Preparing to update the firmware Prepare a USB flash drive with enough free space. Use the list below to find the firmware file for your instrument, and then copy it to the root of the USB flash drive file system.
-
Page 2: Updating The Firmware
Updating the Firmware Notice: The following must be observed during the firmware update. Do not turn off the instrument during the update. • Do not remove the USB flash drive from the instrument. • Troubleshooting When you run into trouble during the firmware update, refer to the section located at the end of this document. - Page 3 4. Press the [PLAY/PAUSE] button again when the display shows the following message. The red indication below shows the location of the [PLAY/PAUSE] button on the panel. CLP-735, CLP-745, CLP-765GP CLP-775, CLP-785, CLP-795GP Press the [PLAY/PAUSE] button yet again to execute the installation when the display shows the following message.
- Page 4 When the update is completed, the display shows the installed version. 6. Turn off the instrument. After turning off, you can remove the USB flash drive. 7. Press and hold the right most key (C7), and turn on the instrument. Notice: This operation resets the instrument to its factory default settings.
- Page 5 Press the [FUNCTION] button several times to select “System” menu. The red indication below shows the location of the [FUNCTION] button on the panel. CLP-735, CLP-745, CLP-765GP CLP-775, CLP-785, CLP-795GP Press the [∨] button several times to select “Utility,” and then press the [＞] button.
-
Page 6: Troubleshooting
Troubleshooting The power was turned off or the USB flash drive was removed during the firmware update. You need to perform all the operations once again. Go back to the first step, and → follow all the steps to the finish. An error message is displayed and the installation aborts.