Page 1
WARNING: Please read this manual fully and be sure you understand its instructions prior to operating or assembling this tool. Inspect for damage and missing parts upon receipt. Please contact MLCS Woodworking with any problems or questions. Copyright 2009 MLCS...
Page 2
PARTS LIST & CONTENTS Part no. Description Quantity Cast Iron Router Table L-Aluminum Router Table Fence Laminated MDF Fence Faces Dust Port Dust Port Adaptor Bit Guard Aluminum Miter T-Track Owner's Manual Hardware (see Hardware Parts list--next page) Copyright 2009 MLCS...
Threaded Through Knobs M8 x 1.25 Threaded Through Knobs M6 x 1.0 RECOMMENDED ACCESSORIES Router Speed Control (MLCS Item #9400 or #9410) Featherboards (MLCS Item #9478) Push Sticks and Blocks (MLCS Set #9167 or #9169) Copyright 2009 MLCS...
Page 4
12) Never allow those who may disregard safety into the work area, especially children and pets. 13) Never reach too far. Always maintain your balance and footing when working with power tools. 14) Pay careful attention to your environment and always use good judgment. Copyright 2009 MLCS...
Page 5
7) Install the dust port. Use M4 x 8mm screws to lock the dust port in position. Use the (2) M5 x 0.8 x 2” round head machine screws to attach the dust port to the L-Aluminum fence. Miter Gauge Track Installation (see step 6) Copyright 2009 MLCS...
Page 6
T-Track in the MDF router fence to attach the bit guard. 11) Mount your router to the MLCS All-in-One Router Plate #9338 or MLCS Aluminum Router Plate #9334. For most common routers, the MLCS Aluminum Plate #9334 is pre-marked.
Page 7
KNOBS. MLCS THREE-YEAR WARRANTY AND SATISFACTION GUARANTEE MLCS is dedicated to ensuring the quality and durability of every product we sell. We guarantee to the purchaser that this product is free of defects in materials and workmanship for 3 years.