Sealey AP26059TC Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and

general workshop practice regulations are adhered to when
using these units.
Locate the units in a suitable work area.

Keep the work area clean, uncluttered and ensure there is

adequate lighting.
WARNING! Use the Rollcab on level and solid ground,

preferably concrete.
Keep the units clean and tidy in accordance with good

workshop practice.
Keep children and unauthorised persons away from the work

area.
DO NOT use these units for any purpose other than that

for which they are designed.
DO NOT use the units outdoors.

DO NOT place the units in a damp or wet location or an

area where there is condensation.
DO NOT clean the units with any solvents which may

damage the surfaces or the protective coating.
 DO NOT move the units with the drawers out. To avoid
tipping, open one drawer at a time and close and secure all
drawers whilst moving.
 DO NOT step on the drawers.
 DO NOT overload the drawers, weight limit per drawer is
36kg.
2. INTRODUCTION
• All designed to take our modular tool trays.
• All heavy gauged steel construction and manufactured with
steel inner walls for extra strength and durability.
• Heavy-duty 45mm ball bearing drawer runners provide superior
performance and carry heavier loads.
• Full height rear locking mechanism, locks full-length drawers in
multiple locations.
• Added security provided by tumbler locks, supplied with two
folding keys.
• Rust and solvent resistant powder coat paint finish.
• The rollcab is fitted with four Ø125mm rubber wheels, two
swivel castors with large toe locks and two fixed wheels.
• Topchest features heavy-duty side handles.
• Rollcab features a high, polished chrome handle for comfort
and control when manoeuvring.
• Rollcab supplied with a 6mm thick top mat to protect top
surface from scratching.
• Drawers feature stylish aluminium drawer pulls and non-slip
liners.
3. SPECIFICATION
Model No.
Overall Size W x D x H (mm):
Medium Drawer (x5):
Large Drawer (x2):
© Jack Sealey Limited
INSTRUCTIONS FOR:
TOPCHEST/ROLLCAB/MID-BOX
WITH BALL BEARING RUNNERS - BLUE
MODEL No'
AP26479TC
685 x 465 x 995mm
533 x 398 x 60mm
533 x 398 x 160mm
Original Language Version
AP26059TC/AP26479TC/AP26029TC
s:
AP26059TC
660 x 435 x 490mm
533 x 398 x 60mm
AP26029TC
AP26059TC
AP26479TC
AP26029TC
670x 440 x 210mm
(2x) 533 x 398 x 60mm
AP26059TC, 26479TC, 26029TC Issue: 1- 15/07/15