Advertisement
Quick Links
PROTONE
FITNESS EQUIPMENT
9889 Garrymore Ln
FOR PEOPLE WITH DISABILITIES
Missoula, MT 59808
PART #: F-PTN-00
888-687-3552 | +1-406-549-0769
KEEP THIS MANUAL WITH OWNER IN A SAFE PLACE
www.aquacreek.com
READ CAREFULLY
Check every box and all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the fi gures and parts listed in this document.
It is critical that all parts be carefully inspected prior to assembly. If any damage occurred in
transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit.
Proper assembly cannot be overstressed, as an improper assembly voids Aqua Creek's warranty
and may aff ect the safety of the user.
Always consult with your physician or physical therapist before beginning any exercise program.
1
Copyright © 2020 Aqua Creek Products All Rights Reserved
Revised 12/14/20
Advertisement
Related Manuals for Aqua Creek Products PROTONE
Summary of Contents for Aqua Creek Products PROTONE
- Page 1 It is critical that all parts be carefully inspected prior to assembly. If any damage occurred in transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit. Proper assembly cannot be overstressed, as an improper assembly voids Aqua Creek’s warranty and may aff...
-
Page 2: Supplied Hardware
A) 3/8” X 2 3/4” HEX BOLT B) 3/8” X 3” HEX BOLT C) 3/8” FLAT WASHER D) 3/8” ACORN NUT E) SILICONE PACKET Tools Required A) 9/16” WRENCH (OR SOCKET) Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 12/14/20... - Page 3 LEFT CURL ARM ASSEMBLY PTN-1300-00 RIGHT CURL ARM ASSEMBLY PTN-1400-00 LEFT EXERCISE ARM ASSEMBLY PTN-1500-00 RIGHT EXERCISE ARM ASSEMBLY PTN-2000-00 RICKSHAW-TRICEP GRIP PTN-3000-00 MAIN WIRE CABLE PTNWP-00 WEIGHT PLATE Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 12/14/20...
- Page 4 (2) 9/16” WRENCH OR SOCKET SILICONE PACKET NOTE: The ProTone will arrive in three boxes but still mostly assembled. However, two people will be needed to complete the assembly due to the weight of the already sub-assembled parts. See below instructions on how to complete the assembly of the ProTone.
- Page 5 MAIN WIRE CABLE The ProTone main wire cable needs to be strung correctly in order for the machine to function properly. Begin by hooking the top of the wire onto the hook at the top of the Deltoid-Latslider Assembly.
- Page 6 See FIG. 4 below. ADJUST THIS NUT TO ADD OR RELEASE TENSION ON THE CABLE BUMP STOP SHOULD BE 1-2 INCHES ABOVE THIS STOP TUBE. TRUCK WEIGHT RAIL FIGURE 4 Copyright © 2020 Aqua Creek Products All Rights Reserved Revised 12/14/20...
- Page 7 In addition, while the videos show and describe many exercises that can be done using the ProTone, the particular exercises you will be able to do will depend on your individual capabilities. Finally, DO NOT exceed 40 pounds on each truck.
- Page 8 (ITEM # F-PTN) Aqua Creek Products, LLC (a.k.a. Aqua Creek) warrants to the original end user purchaser that products manufactured by Aqua Creek, when properly installed in accordance with assembly and installation instructions, and properly used and maintained, shall be free from defects in...