Download Print this page

Sealey AP2200BB Series Instructions

Topchest & rollcab combination 6 drawer with ball bearing runners

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Instruction
Manual
1. SAFETY
1.1.
GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest &
Rollcab combination.
 Locate the Topchest & Rollcab combination in a suitable working area.
 Keep the work area clean, uncluttered and ensure there is adequate lighting.
 Keep the Topchest & Rollcab combination clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the working area.
 DO NOT use the Topchest & Rollcab combination for any purpose other than that for which it is designed.
 DO NOT move the Topchest & Rollcab combination with drawers open.
 DO NOT open more than one drawer at the same time.
 DO NOT step on the drawers.
 DO NOT use in damp work areas.
 WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations that may
occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
2. ASSEMBLY
2.1.
Remove the bolts, nuts and washers from the base of the rollcab (fig.1), and then lift off the body to uncover the topchest.
2.2.
Remove the screws from the base (fig.2), and separate from the topchest, discard the screws.
Note:
Place protective material onto the ground to avoid damaging the back of the topchest.
fig.3
© Jack Sealey Limited
INSTRUCTIONS FOR:
TOPCHEST & ROLLCAB COMBINATION 6 DRAWER
with BALL BEARING RUNNERS
MODEL Nos:
fig.1
Original Language Version
AP2200BB SERIES
fig.2
AP2200BB SERIES
Issue:1 12/07/16

Advertisement

loading

Summary of Contents for Sealey AP2200BB Series

  • Page 1 AP2200BB SERIES MODEL Nos: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions and maintained properly, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. Sole UK Distributor, Sealey Group, www.sealey.co.uk 01284 757500...

This manual is also suitable for:

Ap2200bbhvAp2200bb