Sealey CX204 Instructions

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safety
only use on firm, level, unobstructed surfaces which are capable of supporting the trolley plus load.
9
do Not overload.
8
Always load evenly with the centre of gravity of the load as near the centre as possible.
9
Apply the brakes before commencing work.
9
do Not stand/ride on the trolley, or allow others to do so.
8
replace or repair damaged parts. use only recommended parts. unauthorised parts may be dangerous and will invalidate the warranty.
9
WaRNiNG! failure to comply with these instructions may result in loss of load, damage to the stand or other property and/or personal
‰
injury.
WaRNiNG! the warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
‰
and situations that may occur. it must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. iNtRoductioN
Heavy-duty garage and workshop trolley with 80/60kg capacity per shelf. manufactured from extra-strong impact resistant plastic. ideal for
a variety of applications. one piece moulded shelves prevents spills transferring to lower levels. fitted with four swivel castor wheels, two of
which have brakes.
3. specificatioN
Model No.......................................CX204 (fig.1).............................................CX205 (fig.2)
Overall (W x D x H).............810 x 460 x 785mm...................................810 x 460 x 785mm
Shelf Size..............................675 x 410 x 95mm.....................................675 x 410 x 95mm
capacity.............................................80kg/level................................................60kg/level
Total load Capacity....................................160Kg........................................................180kg
4. assembly
4.1. unpack all parts.
4.2. Attach castors to bottom tray by pushing them into the corners of tray ensure tray is the correct way up. use rubber mallet if required.
4.3. Apply brakes. Push four uprights into corners of bottom tray.
4.4. Align middle tray sockets with four uprights push into place. (CX205 Only)
4.5. Push four uprights into corners of middle tray. (CX205 Only)
4.6. Align top tray sockets with four uprights push into place.
© Jack sealey limited
instructions for
2/3-level composite tRolley heavy-
duty
cX204, cX205
model no:
fig.1
Original Language Version
fig.2
cX204, CX205.V1 | Issue 1 13/04/17