myHummy MS01 User Manual

USER MANUAL FOR THE SOUND DEVICE
"The Humming Heart"
type MS01, MC01, MB02
Thank you for choosing myHummy! Please read this manual carefully
before use and keep for future reference.
GENERAL INFORMATION
myHummy is a product designed to soothe and improve the sleep of babies
and young children. The electronic sound device (the ‚Humming Heart')
generates white and pink noises which have been shown to enhance
sleep. They have a soothing effect on babies and help them sleep better
by masking other sounds. Babies associate these sounds with warmth,
comfort and security they experienced while in their mother's womb. Every
myHummy emits 5 types of sound: white noise, pink noise, ocean waves,
rainfall, and amniotic fluid with heartbeat.. All settings can be changed
by pressing the multi-function button on the device or via a mobile app
(MB02 model). The Humming Heart (MB02) is linked with the app thanks to
Bluetooth® Low Energy technology.
TYPES OF HUMMING HEARTS
5 types of white and pink noise
Fade out after 60 minutes

Sleep Sensor

Non-stop mode
Bluetooth (mobile app)
How to use your myHummy (quick guide):
• switch on and off: press the button for 1 second and release
(the sound will play for 60 minutes).
• change the sound: double click.
• change volume: long press and release.
MC and MB models:
• turn non-stop mode on: click 3 times in a row (you will hear a beep).
• turn non-stop mode off: switch the device off (press for 1 second).
Additional functions available through the app (MB02 model):
• control the duration of sound.
• switch the sleep sensor on and off.
• use the alarm mode to send notifications to your phone when your
baby starts to cry (within bluetooth range).
• use the baby monitor mode to send notifications to your phone when
your baby wakes up, even when the myHummy is not producing any
sound (within Bluetooth® range).

POWER SUPPLY

The Humming Heart is powered by three AAA 1.5V batteries or three
AAA 1.2V rechargeable batteries. Batteries and charger are not included.
Batteries must be installed and replaced by an adult.
• use brand new batteries.
• do not mix batteries of different brands, types and not equaly
discharged.
• only use alkaline AAA batteries with nominal voltage of 1.5V
or rechargeable NiMH batteries with nominal voltage of 1.2V, i.e.
Panasonic Eneloop BK-4MCCE or Li-ion batteries with nominal
voltage of 1.5V
Replace batteries if:
• sound quality deteriorates;
• sound volume drops;
• sound cuts off before the desired time;
• the sound device cannot be switched on;
• the Sleep Sensor does not work.
BEFORE USE
1. open the flap on the sound device using a cross-head screwdriver
(recommended size: PZ1). Using the wrong sized screwdriver
or trying to over-tighten can damage the screw.
2. insert three AAA 1.5V batteries or 1.2V rechargeable batteries –
please pay special attention to the correct position and polarity
(+ / - marks). Batteries should always be inserted from the coil
spring's side (by compressing the spring). Check the batteries for
dmage before use. Damage to the insulating film of the battery may
cause a short circuit and severe heating of the battery and/or the
spring.
3. carefully screw the flap back on to ensure the batteries are out
of children's reach.
REPLACING THE BATTERIES
To remove the batteries, gently move them towards the spring (compressing
the spring) and lift the battery. Never remove the batteries from the side
with the spring as this may cause damage to the spring or the battery.
Under no circumstances should you attempt to pry the battery out
with other objects as the battery may become damaged and unsafe.
Damage to the insulating film of the battery may cause a short circuit and
severe heating of the battery and/or the spring. Always check the batteries
for mechanical damage before use.
SWITCHING ON MYHUMMY
Press the multi-function button for approximately 1 second and release.
Your MyHummy will start to emit sound. In manual control mode, turning
MB02
MS01 MC01
the Humming Heart on will also activate the Sleep Sensor (MC and MB
models). Other functions of the multi-function button are described further
along in this leaflet.
SLEEP SENSOR (MC AND MB MODELS)
The sound will automatically start to fade out after the device has been
functioning for about 60 minutes (when activated manually). The sound
will automatically fade out at a specified time (when set and activated
with the mobile app - MB02 model). After fading out, the Humming
Heart will enter stand-by mode with the Sleep Sensor mode on. If your
baby starts to cry, the same sound will gently fade in until it reaches
the previous volume level. The sound will play for another 60 minutes.
This process will continue for the next 12 hours or until switched off.
To turn the Sleep Sensor off, turn the sound device off by pressing the multi-
function button or use the mobile app.
NON-STOP SYSTEM (MC AND MB MODELS)
To activate the non-stop mode, turn on the device (hold the button for
1 second and release) and then click 3 times in a row - you will hear a beep
which confirms the mode selection. The sound will play continuously
for 12 hours. During this time, the sound device will not turn off (Sleep
Sensor Mode is deactivated), nor will it change the volume or sound.
After 12 hours, the volume will gradually fade out before switching off
completely. You can turn the sound off at any time by holding the button
for 1 second and releasing it. To deactivate the non-stop mode, please turn
off the sound device by pressing the button for 1 second and releasing it.
After switching off, the sound device defaults back to the Sleep Sensor
mode. The Non-Stop Mode and Sleep Sensor Mode can never be active
at the same time.
MOBILE APP (MB02 MODEL)
This feature is available on selected models only: MB02 (green Humming
Heart with a white logo). You can use your phone as a "remote control" for
myHummy. You will need to pair your phone with the Humming Heart via
Bluetooth®. The connection will remain active for 72 hours since the last
interaction. When the sound device has not been used for a long period of
time, it enters stand-by mode. To reconnect, please use the multi-function
button. To reconnect, press the multi-function button.
DOWNLOADING THE APP (MB02 MODEL)
In order to download the myHummy mobile app, use your smartphone
http://app.myhummy.com
to visit this website:
links to download the app, further instructions, answers to frequently asked
questions and a contact form to get in touch with our technical support
team if you need any assistance.

ADJUSTING THE VOLUME

Your myHummy has approximately 15 volume levels (depending
on the chosen sound). To change the volume, press and hold the button
until the sound reaches the desired volume and release the button. Repeat
to change the volume up and down. The sound device will store your
previously selected sound and volume level when it automatically restarts
or is manually turned back on. Volume level returnes to default after the
batteries have been exchanged.
CHANGING THE SOUND
To change the sound, press the button twice quickly.
INSERTING THE HUMMING HEART
The Humming Heart is only meant to be used when placed securely
in the zip pocket of myHummy or the travel pouch (available on
selected models). Use a paper clip to fasten and unfasten the zip
pocket. Do not leave the paper clip in the zip! Always close the zip
to ensure the sound device is out of children's reach.
WASHING INSTRUCTIONS
All myHummy products are made from high quality, machine washable
materials.
ATTENTION! Always ensure you have removed the sound device from
the pocket before washing. If the sound device has come into contact with
water, it must not be used and should be discarded according to the disposal
regulations for electronic goods.
MyHummy products can be washed at up to 40°C/ 104°F. To maintain the
original shape of the product, slightly stretch the material after washing.
Make sure the pocket is completely dry before inserting the sound device.
• Do not tumble dry
• Do not iron
• Do not dry clean
WARNING!
The sound device is not a toy!
• The sound device should only be used when placed securely in the
pocket of myHummy.
• Keep the device out of children's reach.
• Always check that the pocket is closed before giving the product
to a child.
BATTERY SAFETY
• Keep batteries out of reach of children
• Installing, replacing and charging the batteries should be performed
by an adult
• Check the batteries for dmage before use. Damage to the insulating
film of the battery may cause a short circuit and severe heating of the
battery and/or the spring.
• Only use alkaline batteries of the highest quality or rechargeable
batteries NiMH or Li-ion(recommended: Panasonic Eneloop)
• All batteries must be of the same type
• Don't mix old and new batteries
• Don't mix rechargeable batteries with different charge levels
• Check the polarity of batteries (+/-)
• Never charge single-use batteries - this may cause leaks or explosion
• When charging rechargeable batteries always use a correct charger
• Remove batteries from the toy before charging
• Don't expose batteries to hot temperatures, direct sunlight or any
There, you will find