Keysight Technologies N1060A Quick Start Manual

N1060A Precision Waveform Analyzer
Installation
1. On the N1000A DCA-X, click Help > About and check
firmware version. Minimum required FlexDCA Firmware
Version is A.06.00. Download the firmware at:
www.keysight.com/comms/dca
2. Insert the N1060A into the left three front-panel slots
in the N1000A's module bay.
3. Finger tighten the front-panel knurled locking screws.
4. Remove the screw-on channel shipping protectors.
N1 06 0A
Pre cisi on
Wa vef orm
Ana lyze r
50 GH z BW
Pr ec isi on
Tim eb as e
Ch A/ CD R+
Inp ut
±1 V Ma
(2.9 2 mm
x
)
CD R Ra tes
Ad jus tab le
Loo p
50 Ω
2.4 -32 GH
z
±2 V Ma
x
Ch B/ CD R-
±1 V Ma
x
Re co ve re
d
Cl oc k Ou tp
(2.9 2 mm
)
0.5 Vp p No
m
5. Click Help > Contents to view help system. Search on
N1060A for documentation.
Search on
N1060A
Screw-on
shipping protectors
ut
N1000A Help System
N1060A
DCA-X
DCA-X Series Wide-Bandwidth Oscilloscope
N1000A
Trigger Precision DC Cal
Input Timebase
Input
(2.92 mm)
(2.92 mm)
50 Ω 50 Ω
DC-32 GHz 2.4-44 GHz
2 Vpp Max ± 2 V Max
Locking Screws
Avoiding Expensive Repairs
Refer to the accessory kit user's guide for
instructions on safely connecting devices to the N1060A
front-panel RF connectors without causing expensive
damage.
Channel Inputs
Max. input signal: ±1Vpp (+10 dBm)
Max. 1.0 mm connector torque: 4 lb-in. (0.45 Nm)
Max. 2.92 mm connector torque: 5 lb-in. (0.57 Nm)
Read accessory kit user's guide for critical information.
Electrical channel input
circuits can be damaged by electro-
static discharge (ESD). Therefore,
avoid applying static discharges to the remote head's
input connectors. Prior to connecting any coaxial cable
to the connectors, momentarily short the center and
outer conductors of the cable together. Avoid touching
the front-panel input connectors without first touching
the frame of the instrument.
Vertical Acquisition
Armed
Triggered
Horizontal
Press to
select
Marker
Position
Press to
select
N1060A Precision Waveform Analyzer 85 GHz BW
Precision
Timebase
Input
(2.92 mm)
Ch A/CDR+
±2 V Max
CDR Rates
Adjustable Loop
50 Ω
2.4-32 GHz
1.3 Vpp Max
Ch B/CDR-
±2 V Max
Recovered
Clock Output
(2.92 mm)
0.5 Vpp Max
1 2 3 4
Static
Sensitive