Managing Module Access By Password; Table 33 Add User Page Of Account Page - Ap/ Sm/Bh - Cambium Networks PTP 450 Series Configuration Manual

Chapter 1: Configuration

Managing module access by password

Applicable products
See Managing module access by password in Planning and installation Guide.
Adding a User for Access to a module
The Account > Add User page allows to create a new user for accessing 450 Platform Family -
AP/SM/BHM/BHS. The Add User page is explained in

Table 33 Add User page of account page - AP/ SM/BH

Attribute
User Name
Level
New Password
Confirm Password
User Mode
Note
The Read-Only user cannot perform any service impacting operations like creating read-
only accounts, editing and viewing read-only user accounts, changes in login page, read-
only user login, Telnet access, SNMP, RADIUS and upgrade/downgrade.

PMP: AP
Meaning
User Account name.
Select appropriate level for new account. It can be INSTALLER,
ADMINISTRATOR or TECHNICIAN. See Managing module Access by
passwords in Planning and Installation Guide.
Assign the password for new user account
This new password must be confirmed in the "Confirm Password" field.
User Mode is used to create an account which are mainly used for viewing
the configurations.
The local and remote Read-Only user account can be created by "Admin",
"Installer" or "Tech" logins. To create a Read-Only user, the "read-only"
check box needs to be checked.
Page

SM PTP:
Table 33.
1-111
Configuring security
 
BHM BMS