- 1 or 2 x DDR4 SO-DIMM Memory - 1 x UDOO BOLT Power Supply* or other 19VDC (min 60W power) PSUs cer- tified for your country ( Make sure that the power cable is less than 3 mt. long) - 1 x Bootable USB Drive with OS installation on it**;...
BOTTOM VIEW SSD/PCI-e M.2 Socket 2 Key B Connectivity M.2 Socket 1 Key E SATA Power SATA 3.0 Embedded Controller I/O eMMC 5.0 32GB AT Mega32U4 Arduino - Compati- NVMe M.2 Socket 3 Key M ble Microcontroller...
Page 7
NOTICES Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Items cannot be returned unless previously authorized by the supplier. The authorization is released after completing the specific form available on the web-site http://www.udoo.org/customer-care/ (Open a New Ticket -> Return Merchandise Application). The RMA authorization number must be put both on the packaging and on the docu- ments shipped with the items, which must include all the accessories in their original packaging, with no signs of damage to, or tampering with, any returned item.
In most cases it is possible to find useful information to solve the problem. - UDOO Forum: join to the community of UDOO users. In the forum, available at http://www.udoo.org/forum/, it is possible to search the multiple topics of the commu- nity, and look for other users that had the same kind of problem - and how they solved it.
Need help?
Do you have a question about the BOLT and is the answer not in the manual?
Questions and answers