System Reset; Facepack Reset - FXLuminaire Luxor Owner's Manual And Installation Instructions

Care and Maintenance

System Reset

There are two types of system resets: facepack reset and
database reset. The facepack reset simply removes power to the
facepack and restarts the firmware. A database reset deletes
the entire database to allow the user to start from scratch.
All program data is lost during a database reset, but fixture
assignments remain intact.

Facepack Reset

1. Remove the facepack from the chassis by pulling on the tab
to the right of the facepack.
2. Swing the facepack door open.
3. Locate a paper clip, pen tip, or other small-point tool.
4. Locate the reset button on the back of the facepack.
5. Press and hold the reset button for two seconds using the
selected tool.
32
Figure 35: Reset button