Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NewerTech AdaptaDrive
Summary of Contents for NewerTech AdaptaDrive
- Page 1 AdaptaDrive ® ASSEMBLY MANUAL & USER GUIDE...
- Page 2 INTRODUCTION Drive Compatibility The NewerTech AdaptaDrive is compatible with any 2.5” hard drive or SSD that uses a standard SATA connector. It allows you to use these drives within spaces that were originally designed for 3.5” SATA drives. The example below shows the AdaptaDrive (with an SSD connected) mounted inside a multi-bay, 3.5”...
- Page 3 INSTALLATION Connect your 2.5” SATA drive to the SATA connector on the NewerTech AdaptaDrive. Holding the SSD or hard drive in place, turn the AdaptaDrive over. Notice the four recessed, oval-shaped screw holes. NEWERTECH ADAPTADRIVE INSTALLATION...
- Page 4 There are eight Phillips head screws included. Use the four with the slightly narrower diameter and smaller screw head to fasten the NewerTech AdaptaDrive to your drive. Once the screws are fastened the top view should look like the photo at left.
- Page 5 As noted earlier, the NewerTech AdaptaDrive can be installed into your computer’s 3.5” SATA drive bays as well. The example below shows the AdaptaDrive being installed into an Apple® Mac Pro®. NEWERTECH ADAPTADRIVE INSTALLATION...
- Page 6 If installed in a computer, shut the computer down, disconnect the power and verify that the AdaptaDrive is fully seated into the drive bay (or that it is fully connected to the SATA cable, if applicable). If installed into an...
- Page 7 Changes: The material in this document is for information purposes only and subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Other World Computing and its officers and employees assume no liability resulting from errors or omissions in this document, or from the use of the information contained herein.
- Page 8 Newer Technology Inc. AdaptaDrive, NewerTech, Newer Technology, and the Newer Technology arrow logo are trademarks of New Concepts Development Corporation, registered in the U.S.
Need help?
Do you have a question about the AdaptaDrive and is the answer not in the manual?
Questions and answers