Page 1
1 Module introduction The LST1FW3A1 (JG371A) module integrates the firewall, VPN, content filtering, and NAT functions. By installing an LST1FW3A1 (JG371A) module in a 12500 switch, you can provide complete and reliable security protection for users, without changing the network topology.
Page 2
Manual Version: 6P103-20130916 BOM: 3123A0MN Part number: 5998-3444 Item Specification One built-in CF card slot CF card Default: 256 MB Dimensions (H × W × D) 40.1 × 399.2 × 498.8 mm (1.58 × 15.72 × 19.64 in) Power consumption 128 W to 168 W Weight 4.8 kg (10.58 lb)
Page 3
(24.86 miles) miles) Operating mode 1000 Mbps, full duplex 3 LEDs The LST1FW3A1 (JG371A) module provides LEDs to show the operating status of the module and interfaces. Table 5 LED description Status Description The system is operating properly. Alarm LED (ALM) A serious failure has occurred.
Page 4
Manual Version: 6P103-20130916 BOM: 3123A0MN Part number: 5998-3444 4 Installing and removing the LST1FW3A1 (JG371A) module CAUTION: Wear a well-grounded ESD-preventive wrist strap before you install or remove the module. • Do not touch the surface-mounted components directly with your hands when you install or remove the •...
Guides 6 Software upgrade You can upgrade the LST1FW3A1 (JG371A) module software through its console port or Ethernet ports. The LST1FW3A1 (JG371A) module uses a different BootWare and system software image than the switch. You can upgrade the system software image of the module by using the following methods: 6.1 Upgrading software in the Web interface...