Page 1
Register your product and get support at Philips Presenter SNP3000 www.philips.com/welcome EN User manual...
Page 4
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT Wavelength : 645 - 660nm Maximum Power < 1mW IEC 60825-1:1993 + A1:1997 + A2:2001 EN 60825-1:1994 + A2:2001 + A1:2002 CAUTION INSTRUCTIONS...
Page 5
Important Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC.
When battery is installed: • To switch on the Presenter, push the USB receiver into the Presenter and then remove the USB receiver from it. • To switch off the Presenter, push the USB receiver to the end. Auto-connect 1 Ensure that your notebook is switched on and active. 2 Ensure that your Presenter is switched on.
Page 7
Light on your Presenter does not blink. Ensure that the Presenter is switched on. Replace battery on the Presenter.