Advertisement
Quick Links
YSMART TECHNOLOGY CO.,LTD
Intelligent Solar
This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has
efficient MPPT controller charging function to automatically track the maximum power point, 10% -30%
higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30%
energy than ordinary controller, the standby power consumption of only 10mA-15mA.
1:Product introduction
Solar LCD series a kind of intelligent, multi-purpose solar charge and discharge controller
LCD screen display
Easy operation interface
MPPT+ PWM charging mode
Parameter user can reset
A key to open and close the load
A key to restore the factory settings
2: Installation Instructions
Installation（Installing wires, first loosen the screw counterclockwise）
Ready Qi installation tools and materials, and cable. Please matching
1
suitable cable
ensure that the current density <4A/mm2 This will help reduce the line
2
pressure drop.
Check the installation site meets the relevant safety requirements, avoid
damp, dusty, flammable, explosive and corrosive gases
Install the controller fixed to the vertical plane, see Section V mounting aperture and hole spacing.
3
In order to ensure a good controller cooling conditions, the controller on the bottom of each
reserved 10cm space
As shown on the right wiring sequence: load, battery, solar
4
Battery plate is connected to the controller to be taken to ensure that the load, battery,
The polarity of the solar cell panel and controller
Before use: external temperature sensor probe into the left of the controller temperature probe
5
interface probe placed in similar battery temperature. (Line extension must be built-in devices of
the external temperature probe coextensive Otherwise, the controller will control parameters of the
temperature compensation of the error
Warning: In order to prevent accidents from occurring, install: non-professionals can not be
6
engaged in loading and unloading operations
3:LCD operating interface description
Add:No. 30 XinFeng Road,Potoubei Village,Ailian Town,Longgang Dist,Shenzhen 51872,P.R. China
website:www.ysmart-tech.com
Charging and discharging
User s Manual
Battery reverse discharge protection
Battery reverse polarity protection
Battery under voltage protection
Overload, short-circuit protection
Automatic temperature compensation function
USB 5V charging (for 500mA) for mobile phone
Phone: 86-755-85232255
Controller
Advertisement
Summary of Contents for YSMART MPPT10
- Page 1 YSMART TECHNOLOGY CO.,LTD website:www.ysmart-tech.com Phone: 86-755-85232255 Intelligent Solar Charging and discharging Controller User s Manual This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
- Page 2 YSMART TECHNOLOGY CO.,LTD website:www.ysmart-tech.com Phone: 86-755-85232255 LOAD ON 1 H---23H Load control (1 hour --- 23 hours can be set) LOAD ON 24H 24 hour -is normally open state 0h-light control mode, power supply load after dark, closed after daybreak the load 24h-represents a normal mode, in the case of no fault, the load is always in the power supply state.
- Page 3 YSMART TECHNOLOGY CO.,LTD website:www.ysmart-tech.com Phone: 86-755-85232255 Parameters / Model MPPT10 MPPT20 MPPT30 MPPT40 Maximum power current Installation Lin（mm ） 10mm 12mm Installation Line(AWG) 10(AWG) 8(AWG) 7(AWG) 6(AWG) Weight 280g 300g 475g 143×89×46（mm） 187*97*61（mm） Dimensions System load loss ≤13mA Loop Buck ≤100mV...