Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. • If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified technician in order to avoid a hazard. •...
Operation Remove the appliance from the packaging. Make sure that all protective plastic film and plastic coatings are Handle thoroughly removed from all surfaces. Note: Before using for the first time, clean the interior of the appliance and all parts in warm soapy water, then rinse thoroughly.
Flush out the system thoroughly to remove any descaler residue. The appliance is now ready for use. Note: Use a suitable descaler and always follow the instructions on the container. BUFFALO recommend that this appliance is descaled every 3 months or more frequently in hard water areas. Troubleshooting...
BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.
C-TICK AS/NZ 3820 Essential Safety Requirements for Low Voltage Electrical Equipment EN 55014-1:2000/A1:2001, EN 61000-3-2:2000, Standards EN61000-3-3:2095/A1:2001, EN 55014-2:2097/A1:2001 AS/NZ 60335.2:2005+A1 BUFFALO Producers Name Nisbets Australia PTY Ltd Producers Address Unit 2, 34/38 Anzac Ave Smeaton Grange NSW 2567 Australia I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).