Advertisement
Quick Links
KMD14.2/16.2.2A/14.2A
Audio mixing consoles with 24-bit digital multi effects processors
M
A
N
Two powered and one passive model available
KMD14.2A - 14 channel powered mixer
KMD16.2.2A - 16 channel powered mixer
KMD14.2 - 14 channel mixer
Ultra low noise mic preamps with +48V phantom power
Additional multi-functional stereo channels
Switchable 7 band graphic equalizer for ultimate main mix equalization
Alt 3-4 bus routable to main mix and control room with insert
Extremely high headroom offering increased dynamic range
Balanced inputs and main outputs for high signal integrity
4 band EQ on stereo channels and 3 band EQ on mono channels
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
U
A
L
V
0 6 . 0 6 . 2 0 1 0
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
© Copyright Lamba plc 2010. E&OE.
E
R
S
I
O
Switchable low cut filter on all mono channels
FX sends (post) per channel for internal or external effects and monitoring
Master aux sends with gain control and PFL / Aux sends (pre/post) per channel
Mute/Alt 3-4, solo-in-place and pre-fader-listen function on all channels
Separate main mix, Alt 3-4, control room and headphone outputs
2 track inputs assignable to main mix or control room/headphone outputs
Highly accurate 12 segment barograph meters
High quality 60mm faders and high quality sealed potentiometers
99 preset effects digital processor with 24bit DSP, sampling rate: 31.25kHz
Blue LCD for signal level & effects full name and parameter display
Soft start, DC, AC short circuit, clip limiter, thermal cut, power limiter
N
1
.
0
Advertisement
Related Manuals for KAM KMD14.2
Summary of Contents for KAM KMD14.2
- Page 1 For the latest instruction manual updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
- Page 2 Thank you for purchasing this product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. After you have read the instructions, please retain them for future reference. This unit has been tested at the factory before being shipped to you.
- Page 4 (1) MICROPHONE Accepts a standard XLR male connector. Ground = shield / hot = signal input / cold = ground (shield). Maximum -60dB~ -10dB signal level set by the gain control. (2) LINE INPUT Accepts a standard 1/4 inch standard line connector. You can use unbalanced (tip/signal) and balanced (tip/ring/signal).
- Page 5 (33) DIGITAL EFFECTS PROCESSOR 99 Effects (for details see table at the end of the manual) 01 – 08 Reverb Hall 09 – 14 Reverb Room 15 – 20 Reverb Plate 21 – 25 Ambient 26 – 31 Gated Reverb 32 –...
- Page 6 (59) CHANNEL INSERTS Pre-fader/pre-EQ. Tip = send / Ring = return. (60) ALT3-4 INSERTS (61) ALT3-4 OUTPUTS (62) MAIN INSERTS (63) MAIN OUTPUTS (UNBALANCED) (64) MAIN OUTPUTS (BALANCED) (65) BALANCED MAIN OUTPUT LEVEL SWITCHES To choose between the two operating level settings-10dBV and +4dBU. (66) PHANTOM POWER When you push the switch, all Mic outputs have +48V phantom power supplied.
- Page 7 DIGITAL EFFECTS PROCESSOR SPECIFICATIONS 24-Bit DSP with built in 20-Bit AD/DA stereo converters 20-Bit delta sigma 64x oversampling AD converter (in DSP) / 20-Bit delta sigma 128x oversampling DA converter (in DSP) 64x oversampling ADC digital filter (in DSP) / 128x oversampling DAC converter (in DSP) Sampling rate 31.25KHz / 1MB SRAM chip for high quality stereo reverb and delay sounds Audio signal “overshooting”...
- Page 8 Specifications Model KMD14.2 KMD14.2A KMD16.2.2A Nett weight 5.9Kg 9.6Kg 11.45Kg Dimensions (+/-3mm) 412 x 400 x 134mm 412 x 400 x 134mm 624 x 458 x 136mm Power supply AC100V-240V 50/60Hz AC100V-240V 50/60Hz AC100V-240V 50/60Hz Packing size(WxDxH) 560 x 520 x 190mm...