Monogram.
™
ZGU48L6RDSS—48" Professional Gas Cooktop
Dimensions and Specifications (in inches)
Cooktop
Front Projects Outward as Shown
From Standard Depth Cabinets.
Cooktop
Front Flush With Cabinets - a Minimum
of 25-3/4" Cabinet Depth Required
21-1/4"
High
Back
12"
Countertop
Level
8-7/16"
1/2"
3" to Center Line
of Gas Inlet
1/2"
Cabinet Face - Projecting Control Panel
Cabinet Face - Flush Control Panel
Specification Created 7/01
1/2" Above Adjacent
Countertops.
1/2" Above Adjacent
Countertops.
Flush With Cabinet Front
26-5/8"
Low Back
22-3/4"
23-1/4"
2-1/2"
This cooktop is factory set for liquid propane gas and has 6 gas
burners and grill.
Natural Gas Model Also Available:
ZGU48N6RWSS–6 gas burners and grill.
Installation Options:
This cooktop can be installed in standard 24" or deeper 25" cabinets.
• In 24" deep cabinets, the front of the cooktop will project
approximately 1-7/8" beyond the front of the countertop.
• In 25" deep cabinets, the cooktop will be flush with the front of the
countertop
• The stainless surface of the cooktop will be 1/2" higher than adjacent
countertop.
Accessory Requirements:
All models require the installation of a backguard. A backguard should
be ordered at the same time as the cooktop. Both should be
on site before cabinetry has been installed.
Order one backguard:
ZXC1B48WSS–1-1/2" high backguard (required for island installations)
ZXC12B48WSS–12" high backguard
ZXC22B48WSS–22" high backguard with warming shelf (2 piece)
ZXC22B48WSS
ZXC1B48WSS
For answers to your Monogram,
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
R
ZXC12B48WSS
GE Profile
or
®
™