Page 1
GE Front Loading Laundry Pair Installation Options We bring good things to life.
Page 2
Washer: • Install separate Hot & Cold faucets within 42" of the washer inlet. • Provide a standpipe, 1-1/4" min. dia. and 24" min., 58" max. high. The attached drain hose will reach a 58” standpipe. • The washer must be supplied with 120 volt, 60 Hz., and connected to an individual, properly polarized and grounded branch circuit protected by a 15 amp circuit breaker or time delay fuse.
Page 3
• To complete the installation follow instructions packed with the washer and dryer. • Order Built-In Instruc- tions, Pub. No. 14-T029 • No trim kits required. Dryer Top Sheet • Order Accessory Kits: Washer Pub. No. 14-A037 Dryer Pub. No. 14-A008...
Page 4
GE Appliances General Electric Company Louisville, Kentucky 40225 www.ge.com/appliances Listed by Pub. No. 14-T019 Underwriters Laboratories N.D. 413 (8/99)