GE 21397 User Manual

Model 29580
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
Speakerphone
following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio
with 12-Number
or television that is "receiving" the interference).
• Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
Memory
• Connect the telecommunications equipment into an outlet on a circuit
different from that to which the receiving antenna is connected.
User's Guide
If these measures do not eliminate the interference, please consult
your dealer or an experienced radio/television technician for additional
suggestions. Also, the Federal Communications Commission has prepared
a helpful booklet, "How To Identify and Resolve Radio/TV Interference
Problems." This booklet is available from the U.S. Government Printing Office,
Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when
ordering copies.
Notice: The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Hearing Aid Compatibility (HAC)
This telephone system meets FCC standards for Hearing Aid Compatibility.
Licensing
Licensed under US Patent 6,427,009.
FCC RF Radiation Exposure
Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body. This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter."
Equipment Approval Information
Your telephone equipment is approved for connection to the Public Switched
Telephone Network and is in compliance with parts 15 and 68, FCC Rules
and Regulations and the Technical Requirements for Telephone Terminal
Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other
information, the US number and Ringer Equivalence Number (REN) for
the equipment. You must, upon request, provide this information to your
telephone company.
The REN is useful in determining the number of devices you may connect
to your telephone line and still have all of these devices ring when your
telephone number is called. In most (but not all) areas, the sum of the RENs
of all devices connected to one line should not exceed 5. To be certain of
the number of devices you may connect to your line as determined by the
Introduction
REN, you should contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68 rules CAUTION: When using telephone
and requirements adopted by the ACTA. A compliant telephone cord and equipment, there are basic safety
modular plug is provided with this product. It is designed to be connected
instructions that should always be
to a compatible modular jack that is also compliant. See installation
followed. Refer to the IMPORTANT SAFETy
instructions for details.
INSTRUCTIONS provided with this product
Notes
and save them for future reference.
• This equipment may not be used on coin service provided by the
telephone company.
Before you Begin
• Party lines are subject to state tariffs, and therefore, you may not be able
to use your own telephone equipment if you are on a party line. Check
with your local telephone company.
Parts Checklist
• Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line. Make sure your package includes the items shown here.
• If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this product does not disable
your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified
installer.
US Number is located on the cabinet bottom.
REN Number is located on the cabinet bottom.
2 Rights of the Telephone Company
Base unit
Should your equipment cause trouble on your line which may harm the
telephone network, the telephone company shall, where practicable, notify
you that temporary discontinuance of service may be required. Where Telephone Jack Requirements
prior notice is not practicable and the circumstances warrant such action,
To use this phone, you need an RJ11C
the telephone company may temporarily discontinue service immediately.
In case of such temporary discontinuance, the telephone company must: type modular telephone jack, which
(1) promptly notify you of such temporary discontinuance; (2) afford you
might look like the one pictured here,
the opportunity to correct the situation; and (3) inform you of your right to
installed in your home. If you don't have
bring a complaint to the Commission pursuant to procedures set forth in
a modular jack, call your local phone
Subpart E of Part 68, FCC Rules and Regulations.
company to find out how to get one
The telephone company may make changes in its communications
facilities, equipment, operations or procedures where such action is installed.
required in the operation of its business and not inconsistent with FCC
Important Installation Information
Rules and Regulations. If these changes are expected to affect the use
or performance of your telephone equipment, the telephone company
• Never install telephone wiring during a lightning storm.
must give you adequate notice, in writing, to allow you to maintain
uninterrupted service.
• Never install telephone jacks in wet locations unless the
Interference Information
jack is specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals,
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference; unless the telephone line has been disconnected at the
and (2) This device must accept any interference received, including
network interface.
interference that may cause undesired operation.
• Use caution when installing or modifying telephone lines.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
• Temporarily disconnect any equipment connected to the
designed to provide reasonable protection against harmful interference in a
phone such as faxes, other phones, or modems.
residential installation.
Important Installation Guidelines
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
• Install telephone near a telephone (modular) jack.
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
• Avoid sources of noise, such as a window by a busy
Privacy of Communications may not be ensured when using this product.
street, and electrical noise, such motors, microwave
ovens, and fluorescent lighting.
Visit our website at: www.GE.com/phones
• Avoid heat sources, such as heating air ducts, heating
appliances, radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low
temperature.
Thomson Inc.
• Avoid dusty locations.
101 West 103rd St.
• Avoid cordless telephones or personal computers.
Model 29580 Indianapolis, IN 46290-1102
00021397 (Rev. 1 Dom E/S) © 2008 Thomson Inc.
08-05 Trademark(s) ® Registered
Printed in China Marca(s) Registrada(s)
Base Layout
memory store
*
flash
(button)
(button)
redial/pause
(button)
Installing the Phone
Connecting the Telephone Line
Choose the best location to install your speakerphone. Your
speakerphone should be placed on a level surface such as a
desk or table top, or you may mount it on a wall.
NOTE: The unit is shipped from the factory for
placement on a level surface.
1. Plug one end of the coiled cord into the handset jack and
the other end into the jack on the left side of the base.
2. Plug one end of the straight telephone line cord into
the back of the base and the other end into a modular
telephone jack.
3. Adjust the ringer volume switch to the desired listening
level.
The unit is properly installed if you pick up the handset and
hear the dial tone. If you don't hear a dial tone recheck all the
installation steps.
Installing the Wall Mounting Bracket
Your telephone may also be mounted on a wall plate
(not included).
NOTE: To prevent the handset from falling out
of the cradle while the phone is hanging on the
wall, you must rotate the handset hook 180°
(located on the base). (See diagram below)
Wall Handset
mount
cord
Line
Handset
bracket
cord
Wall plate
Modular
telephone
line jack
1. Rotate the hook 180°. (Refer to Dia. 1A)
2. Feed the line cord through the groove and wrap the cord
around the track on the bottom of the base.
3. Feed the line cord through the groove on the opposite side
of the track, and plug the end into the modular telephone
jack.
4. Slip the mounting holes (on the bottom of the base) over the
wall plate posts and firmly slide the unit down into place.
Adjusting the Ringer Volume
You may control the ringer volume level with the switch
located on the side of the base.
= ringer tone will be loud
= ringer tone will be low
= telephone will not ring
Telephone Operation
Speakerphone
mute
(buttons)
(button)
For hands-free operation and convenience, this unit is
equipped with a speakerphone.
ringer For best speakerphone performance, avoid the following:
volume
switch • Areas with high background noise. (The microphone
might pick up these sounds and prevent the
speaker
speakerphone from going into the receiving mode when
(button)
you finish talking.)
handset
volume • Surfaces affected by vibration.
switch
• Recessed areas such as in a corner, under a cupboard, or
store
next to a cabinet, which can generate an echo effect.
(button)
Note the following guidelines when using the
speaker
speakerphone:
volume
switch
• Stay reasonably close to the phone so that you can be
clearly heard by the person to whom you are talking.
• You can adjust the speaker volume by adjusting the
speaker volume switch on the right side of the base.
# (button)
• The speakerphone indicator comes on when the
speakerphone is in use.
dial (button)
IMPORTANT: Before using the speakerphone,
pick up the handset and listen for a dial tone. If
you do not hear a dial tone, recheck or repeat
the installation steps.
Handset
1. Pick up the handset and listen for a dial tone.
2. Dial the number you want to call.
3. When finished, hang up the handset.
Speakerphone
1. Press the speaker button on the base and listen for a dial
tone.
2. Dial the number you want to call.
3. When finished, press the speaker button to hang up.
Answering a Call
NOTE: Make sure the ringer volume switch is
set to HI or LO, or the phone will not ring.
Handset
1. When the phone rings, pick up the handset.
2. When finished, hang up the handset.
Speakerphone
1. When the phone rings, press the speaker button to answer
a call.
2. When finished, press the speaker button to hang up.
You may switch between the speakerphone and the handset
during the dialing process or anytime during a conversation.
Speakerphone to Handset - Pick up the handset to disable
the speakerphone. The speakerphone indicator turns off.
Handset to Speakerphone - Press the speaker button, and
then hang up the handset. The speakerphone indicator turns
on and the handset is disabled.
Volume
You can control the volume of both the handset receiver and
the speakerphone.
While using the handset or speakerphone, adjust the receiver
or speaker volume switch, located on the base, to the desired
listening level.
Flash
Press the flash button to activate customer calling services
such as call waiting or call transfer, which are provided by
your local phone company.
Redial
You may redial the last number you called by pressing the
redial/pause button after you get a dial tone.
(dia. 1A)
NOTE: The Redial feature holds in memory
the last phone number you dialed (as many
as 32 digits). If you pressed any numbers
after dialing the phone number, (for example,
when accessing a voice-menu system) those
numbers also are redialed.
Mute
You can use the mute button to interrupt a phone
conversation to talk privately with someone else in the room.
A conversation can be muted with speakerphone or handset
use.
1. Press mute to activate the mute feature. The mute indicator
turns on.
2. Press mute again to deactivate.
NOTE: Switching from speakerphone to
handset cancels mute.
Memory General Product Care
Store as many as 13 memories (three priority, ten two touch) To keep your telephone working and looking good, follow these
guidelines:
for programming your most frequently dialed telephone
numbers. You can store up to 16 digits in each priority key (A,
• Avoid putting it near heating appliances and devices that
B, C), or in each of the numeric keys 0 through 9. Numbers generate electrical noise (for example, motors or fluorescent
must be stored with the handset lifted or the speaker button lamps).
• DO NOT expose to direct sunlight or moisture.
depressed.
• Avoid dropping and other rough treatment to
IMPORTANT: All numbers stored in memory
the telephone.
will be erased if the phone line is disconnected
• Clean with a soft cloth.
from the wall telephone phone jack for more
• Never use a strong cleaning agent or abrasive powder because
than five minutes. Write down any stored
this will damage the finish.
numbers you do not want to lose.
• Retain the original packaging in case you need to ship it at a
later date.
Storing a Number in Memory
Warranty Assistance
To program priority keys:
If trouble is experienced with this equipment, for warranty information,
1. Make sure the telephone is properly installed. Pick up the
please contact customer service at 1-800-448-0329. If the equipment
handset and listen for the dial tone. If you don't hear the
is causing harm to the telephone network, the telephone company may
require that you disconnect the equipment until the problem is resolved.
dial tone, recheck or repeat the installation steps.
2. Press the speaker button or pick up the handset.
Any unauthorized repairs, changes or modifications not expressly
approved by Thomson Inc. could void the user's authority to operate this
3. Press the store button.
product. For instructions on how to obtain a replacement unit, refer to
4. Dial the number to be stored.
the warranty included in this guide or call customer service at 1-800-
5. Press the store button again.
448-0329.
6. Press the A, B or C button.
Or refer inquiries to:
7. Press the speaker button or hang up the handset.
Thomson Inc.
Manager, Consumer Relations
To program frequently called numbers:
P O Box 1976
1. Press the speaker button or pick up the handset.
Indianapolis, IN 46206
2. Press the store button. Attach your sales receipt to this booklet for future reference or jot
down the date this product was purchased or received as a gift. This
3. Dial the number to be stored.
information will be valuable if service should be required during the
4. Press the store button again.
warranty period.
5. Press one of the 10 memory location buttons 0-9.
Purchase Date
6. Press the speaker button or hang up the handset.
Name of Store
Adding a Pause to the dialing Sequence
Limited Warranty
Use the redial/pause button to insert a delay in the dialing
sequence when storing a number, for example, when you What your warranty covers:
need to dial 9 to get an outside line.
• Defects in materials or workmanship.
For how long after your purchase:
Press redial/pause at the point in the dialing sequence in
• One year, from date of purchase.
which a pause is required.
(The warranty period for rental units begins with the first rental or 45
The pause time is four seconds, if an additional four seconds
days from date of shipment to the rental firm, whichever comes first.)
are needed, press the redial/pause button again.
What we will do:
• Provide you with a new unit. The exchange unit is under warranty for
Changing a Stored Number
the remainder of the original product's warranty period.
Change a stored number by replacing it with a different How you get service:
• Properly pack your unit. Include any cables, etc., which were
number.
originally provided with the product. We recommend using the
dialing a Number from Memory
original carton and packing materials.
• "Proof of purchase in the form of a bill of sale or receipted invoice
You can dial numbers from memory when using the handset
which is evidence that the product is within the warranty period,
or speakerphone. When you get a dial tone, press the A, B, or
must be presented to obtain warranty service." For rental firms, proof
C to dial the priority number, press the dial button followed by
of first rental is also required. Also print your name and address and
the memory location (0-9) to dial the frequently called number
a description of the defect. Send via standard UPS or its equivalent
you want to dial. to:
Chain dialing from Memory
Use this feature to make calls which require a sequence of
• Insure your shipment for loss or damage. Thomson Inc. accepts no
numbers, for instance if you use a calling card for a frequently
liability in case of damage or loss.
called long distance number. By dialing each part of the
• A new unit will be shipped to you freight prepaid.
sequence from memory. The following example shows how
What your warranty does not cover:
you can use chain dialing to make a call through a long
• Customer instruction. (Your Owner's Manual provides information
distance service:
regarding operating instructions and user controls. Any additional
information, should be obtained from your dealer.)
The Number For Memory Location
• Installation and setup service adjustments.
Long Distance Access Number 7
• Batteries.
Authorization Code 8 • Damage from misuse or neglect.
• Products which have been modified or incorporated into other
Frequently called long distance number 9
products.
1. Press speaker (or pick up the handset).
• Products purchased or serviced outside the USA.
2. Press the dial button and then press 7.
• Acts of nature, such as but not limited to lightning damage.
Product Registration:
3. When you hear the access tone, press dial and then
• Please visit www.ge.com/phones to register your unit. It will make it
press 8.
easier to contact you should it ever be necessary. Registration is not
4. At the next access tone, press dial and then 9.
required for warranty coverage.
Troubleshooting Guide Limitation of Warranty:
• THE WARRANTy STATEd ABOVE IS THE ONLy WARRANTy
No dial tone. Won't dial out APPLICABLE TO THIS PROdUCT. ALL OTHER WARRANTIES,
ExPRESS OR IMPLIEd (INCLUdING ALL IMPLIEd WARRANTIES OF
• Check the hook switch. Make sure it fully extends when the
MERCHANTABILITy OR FITNESS FOR A PARTICULAR PURPOSE) ARE
handset is lifted from the cradle.
HEREBy dISCLAIMEd. NO VERBAL OR WRITTEN INFORMATION
• Make sure speakerphone indicator comes on (if GIVEN By THOMSON INC., ITS AGENTS, OR EMPLOyEES SHALL
using speakerphone.) CREATE A GUARANTy OR IN ANy WAy INCREASE THE SCOPE OF THIS
WARRANTy.
• Unplug the phone, wait 30 seconds, and plug the phone back in.
• REPAIR OR REPLACEMENT AS PROVIdEd UNdER THIS WARRANTy IS
Then lift the handset to check the dial tone.
THE ExCLUSIVE REMEdy OF THE CONSUMER. THOMSON INC. SHALL
Phone doesn't ring
NOT BE LIABLE FOR INCIdENTAL OR CONSEqUENTIAL dAMAGES
• Make sure ringer volume switch is set to LO or HI.
RESULTING FROM THE USE OF THIS PROdUCT OR ARISING OUT
OF ANy BREACH OF ANy ExPRESS OR IMPLIEd WARRANTy ON
• You may have too many extension phones on your line. Unplug
THIS PROdUCT. THIS dISCLAIMER OF WARRANTIES ANd LIMITEd
some extension phones.
WARRANTy ARE GOVERNEd By THE LAWS OF THE STATE OF
• Check for a dial tone. If there is no dial tone, see solutions for
INdIANA. ExCEPT TO THE ExTENT PROHIBITEd By APPLICABLE
"No dial tone."
LAW, ANy IMPLIEd WARRANTy OF MERCHANTABILITy OR FITNESS
Low handset or speaker volume FOR A PARTICULAR PURPOSE ON THIS PROdUCT IS LIMITEd TO THE
APPLICABLE WARRANTy PERIOd SET FORTH ABOVE.
• Check the receiver or speaker volume settings.
How state law relates to this warranty:
Can't be heard by other party
• Some states do not allow the exclusion nor limitation of incidental
• Make sure phone cord is securely plugged in.
or consequential damages, or limitations on how long an implied
• Make sure extension phones are on the hook at the same time warranty lasts so the above limitations or exclusions may not apply
you're using the phone. It is normal for the volume to drop when to you.
additional extension phones are used at the same time. • This warranty gives you specific legal rights, and you also may have
other rights that vary from state to state.
Memory dialing
If you purchased your product outside the USA:
• Make sure you entered numbers correctly. (See "Memory.")
• This warranty does not apply. Contact your dealer for warranty
• Make sure the telephone is properly installed. Pick up the information
handset and listen for the dial tone. If you don't hear the dial
tone, recheck or repeat the installation steps.
Thomson Inc.
11721 B Alameda Ave.
Socorro, Texas 79927
.