GE JBS55WJ/BJ Dimensions And Installation Information

GE Appliances
JBS55WJ/BJ – GE 30" Free-Standing Electric Range
®
Electrical outlet locat ABC.eps
Dimensions and Installation Information (in inches)
Acceptable electrical
outlet area
29-7/8
*Dimension from wall to front of closed door handle is 27-3/4" .
Specification Created 5/04
321636
30
2-1/2
25
2-1/2
7-1/2
44-7/16
46-7/8
Preferred electrical
outlet area
Roughed-in dimensions
25-3/8
*
47-5/8
Amp Rating
240V 10.5
208V 7.9
Breaker Size
40 Amps
†
Note: Check local codes for required breaker size.
†
A properly grounded branch circuit with a 3 prong grounding type receptacle is required for
GE ranges.
Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals are not
accessible after range installation. See shaded area in drawing for location of electrical outlet
box. Recommended outlet locations allow range to be installed directly against wall.
Note: Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops.
To reduce possibility of scorching walls, it is recommended a minimum of 1-1/2" spacing be
allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating
element operation.
Installation Information: Before installing, consult installation instructions packed with
product for current dimensional data.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
For answers to your Monogram, ® GE Profile
GE appliance questions, visit our website at
®
GEAppliances.com or call
GE Answer Center service, 800.626.2000.
®
Listed by
Underwriters
Laboratories
R
™ or