Kenmore 22802 Information

®
WATER LEVEL
J
ULTRA CLEAN 1(
SOAK
Stock Nos./Reserva Nos./Stock nos.
22802, 22832, 22842, 22852, 22854, 22862, 22872, 22882, 22892, 22894, 23812, 23822, 23832, 23902,
23904, 23912, 23922, 23924, 23932, 23934, 24902, 24904, 24922, 24924, 24932, 24934, 24936
WASHER CYCLE DESCRIPTIONS
This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.
Adjust to load size. Clothes should move freely. To change to a
higher water level after agitating starts, turn knob to desired
setting. On models with Variable Water Level Control, turn the
knob to Reset, then to desired setting.
Select a wash/rinse water temperature based on the type of load.
Some models have AUTO TEMPERATURE CONTROL (ATC). ATC
electronically senses and maintains a uniform water temperature
by regulating temperature of incoming hot and cold water.
WASH/ LOAD TYPE AGITATE/
SPIN SPEED SPIN SPEED
Heavy Duty Sturdy or heavily High-speed
soiled loads agitation/
High-speed spin
Normal Normally soiled Low-speed agitation/
cottons & linens High-speed spin
Handwaeh/ Lingerie & Extra-low speed
Casual loosely knit agitation/
items Low-speed spin
Delicate Washable knits & Low-speed agitation/
permanent press Low-speed spin
fabrics
Handwash
Plus Fine
Delicates
Hand washable and Extra-low speed
special care items agitation/SoaW
Low-speed spin
Permanent Press I
A load cooling spray rinse reduces wrinkling.
Permanent Press II
During the wash cycle, the timer reaches PAUSE, and the washer
cools down the load by replacing some of the wash water with
rinse water. This helps to reduce wrinkling.
Ultra Clean
You may select this cycle for most loads.
Prewash
Helps to remove heavy soils and stains that need pretreatment. This
cycle should be followed by an Ultra Clean or Permanent Press
cycle with additional detergent.
Automatic 2nd Rinse
Removes excess detergent residue. May be automatically added
to the Ultra Clean or Permanent Press cycles. Set the RINSE
OPTIONS Control to 2nd Rinse before you start the washer. You
won't have to come back later to select a second rinse.
Soak
Features agitation followed by unlimited soak time to help
remove heavy soils and stains that need pretreatment. When
finished soaking, reset the washer to a Spin setting to remove
water. The Soak cycle should be followed by an Ultra Clean or
Permanent Press cycle with additional detergent.
8537146 Cycle Selections continued on next page