Sony LMP-C190 User Manual

Projector Lamp
0586-25-6170
9
9
70
Printed on 70% or more recycled paper using VOC (Volatile
Organic Compound)-free vegetable oil based ink.
Sony Corporation  2002
Printed in Japan
4-091-899-06 (1)
•
•
8
5
VOC
/
? 1
1
2 RESET T
5
English
The projector lamp is designed to be used with the Sony projector. Before
replacing the lamp, read the Operating Instructions of the projector and
make sure that this lamp can be used for your projector.
To replace the lamp, refer to the Operating Instructions of the projector.
Cautions
• The lamp becomes a high temperature after turning off the projector with
the ? / 1 key. If you touch the lamp, you may scald your finger. When
you replace the lamp, wait for at least an hour for the lamp to cool.
• When removing the lamp unit, make sure it remains horizontal. If you
pull out the lamp unit while tilted and if the lamp breaks, the pieces may
scatter, causing injury.
Notes
• If the lamp breaks, consult with qualified Sony personnel.
• Please do the following operations after replacing the lamp with a new
one. If you don't so, the message "Please replace the LAMP" may appear
at once after replacing the lamp.
1 Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red.
2 Press the RESET, T, t and ENTER keys on the Remote Commander
sequence less than five seconds each.
(For the models equipped with the RESET key on the unit, the operations
are available with the keys on the unit.)
For the customers in the USA
This product contains mercury. Disposal of this product may be regulated if
sold in the United States. For disposal or recycling information, please
contact your local authorities or Electronics Industries Alliance (http://
www.eiae.org).
For the customers in Europe
Disposal of Old Electrical & Electronic Equipment (Applicable
in the European Union and other European countries with
separate collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural
resources. For more detailed information about
recycling of this product, please contact your local city
office, your household waste disposal service or the
shop where you purchased the product.
t ENTER