Compatible Camera-recorder O AJ-D610WAP O For information on installing this product, contact your deal- er or a Panasonic Service Center. O Do not touch the connector terminals directly with your hands. O If the board will not go in easily, it may be oriented back- wards.
Page 3
Installation in the Camera-recorder In order to record video input signals, the VIDEO I/F board and ROM IC (on the VTR SYSCON board) must first be replaced. To accomplish this, follow the procedure below. O Make sure the camera-recorder power is off before beginning the installation procedure.
Page 4
(Secure both in place using the screws.) VTR SYSCON board Replace ROM IC. Replace VIDEO I/F board. O The camera-recorder will require adjustment after the product is installed. For details on the necessary adjustments, contact your dealer or a Panasonic Service Center.
Page 5
By installing this product in the AJ-D610WAP camera recorder SIGNAL item will appear (ASPECT)/RET screen menu. MAIN Menu Screen 3 of 4 (SUB menus) REC (ASPECT)/RET screen n < R E C ( A S P E C T ) / R E T > R E C S I G N A L : C A M R E C M O D E...
Page 6
DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338- 6835...