Download Print this page

Advertisement

Quick Links

Precision Thick Film Chip Resistors
ERJ type
ERJ XG, 1G
series
ERJ 1R, 2R, 3R, 6R
ERJ 3E, 6E,
8E, 14, 12, 1T
Features
● Small size and lightweight
● High reliability
: Metal glaze thick film resistive element and three layers of electrodes
● Compatible with placement machines
● Suitable for both reflow and flow soldering
● Low resistance tolerance
● Reference standard
● AEC-Q200 compliant (except ERJ1R, ERJXG, ERJ1GN)
● RoHS compliant
■ As for packaging methods, land pattern, soldering conditions and safety precautions,
please see data files.
Explanation of part numbers
Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.
● ERJ 1R, 2R, 3R, 6R series : ±0.5 %
1
2
3
E
R
J
Product code
Size, Power rating
Code inch
Thick film
chip resistors
1R
0201
2R
0402
3R
0603
6R
0805
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
series
series
: Taping packaging available
: ERJXG, 1G, 2R, 3E, 6E,
ERJ1R, 2R, 3R, 6R series
: IEC 60115-8,JIS C 5201-8,JEITA RC-2134C
4
5
6
3
R
B
T.C.R.,Marking
Power rating
Code
–6
0.05 W
H
±50 × 10
0.063 W
B
–6
±50 × 10
–6
0.1 W
K
±100 × 10
–6
0.1 W
E
±100 × 10
8E, 14, 12, 1T
7
8
9
1
0
Resistance tolerance
T.C.R.
Code
Tolerance
D
±0.5 %
/K (1R, 2R)
/K (3R, 6R)
/K (2R)
/K (3R, 6R)
Resistance value
The first three digits are significant
figures of resistance and the last one
denotes number of zeros following.
Example : 1002 → 10 KΩ
(Oct. 2021) Products marked as "NRFND" are
not recommended for new design.
Target products : ERJ8E, 14, 12, 1Tseries
Please refer to the recommended alternatives with
"Design Support Tool" ・
series
:±1 %
:±0.5 %
10
11
12
0
2
V
Packaging methods
Code
Packaging
Pressed carrier taping
C
2 mm pitch, 15,000 pcs
Punched carrier taping
X
2 mm pitch, 10,000 pcs
Punched carrier taping
V
4 mm pitch, 5,000 pcs
Part No.
ERJ1R
ERJ2R
ERJ3R
ERJ6R
22-Dec-22

Advertisement

loading

Summary of Contents for Panasonic ERJ 1R Series

  • Page 1 Precision Thick Film Chip Resistors ERJ type ERJ XG, 1G series ERJ 1R, 2R, 3R, 6R (Oct. 2021) Products marked as “NRFND” are series not recommended for new design. Target products : ERJ8E, 14, 12, 1Tseries ERJ 3E, 6E, 8E, 14, 12, 1T Please refer to the recommended alternatives with series ”Design Support Tool”...
  • Page 2 Precision Thick Film Chip Resistors Explanation of part numbers Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below. ● ERJ XGN, 1GN, 1GJ, 2RC, 2RK, 3EK, 6EN, series : ±1 % 8EN, 14N, 12N, 12S, 1TN Product code Size, Power rating...
  • Page 3 Precision Thick Film Chip Resistors Ratings <±1 %> Limiting Maximum Category Resistance Resistance Power rating T.C.R. AEC-Q200 element overload temperature Part No. range tolerance (70 ℃) range (inch size) Grade voltage voltage (×10 (Ω) (℃) ERJXGN R < 100 Ω : ±300 0.031 ±1 (E24,E96)
  • Page 4: Dimensions (Not To Scale)

    Precision Thick Film Chip Resistors Dimensions (not to scale) Mass (Weight) Dimensions (mm) Part No. (Reference) (g/1000 pcs) ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04 ERJ1G 0.60±0.03 0.30±0.03 0.10±0.05 0.15±0.05 0.23±0.03 0.15 ERJ1R ERJ2R 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 ERJ3R 1.60±0.15 0.80+0.15/-0.05 0.30±0.20...
  • Page 5 ■ The technical information contained in this catalog is intended to show only typical operation and application circuit examples of this product. This catalog does not guarantee that such information does not infringe upon the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been granted.
  • Page 6 Matters to Be Observed When Using This Product Matters to Be Observed When Using This Product (Fixed resistor)  Use environments and cleaning conditions ■ This product (fixed resistor) is not designed for use in specific environments. Using the resistor in the following specific environments or service conditions may affect the performance/reliability of the resistor.
  • Page 7: Mounting Conditions

    Matters to Be Observed When Using This Product  Reliability and product life A product conforming to "AEC-Q200" refers to a product having passed some or all of the evaluation test items defined in AEC-Q200. To know the detailed specifications of individual products or specific evaluation test scores, please contact us. We issue a delivery specification sheet for each product ordered.
  • Page 8: Storage Conditions

    Matters to Be Observed When Using This Product / Reference Information ■ Soldering the resistor with too much solder or too little solder results in the poor reliability of the solder connection of the resistor. Use the proper volume of solder in the soldering process. Sufficiently check for the volume of solder used. ■...

This manual is also suitable for:

Erj 1g seriesErj xg seriesErj 2r seriesErj 3r seriesErj 6r seriesErj 3e series ... Show all