Questions? Call our customer service department at
1-855-995-5578, 8:30 a.m. - 5 p.m., CST, Monday - Friday
or e-mail: contactus@magickwoods.com.
PACKAGE CONTENTS
Matte white model
- 30312
Graphite gray model - 30319
26"W x 33-7/8"H x 17-3/4"D
Knobs (x 2)
1" screws (x 2)
Bumpers (x 4)
Base (x 1)
Sink (x 1)
PREPARATION
Tools required for assembly (not included):
• tape measure
• electric drill with #2 drill bit (A)
• level
• (x2) #8 x 2" screws (B)
• (x2) wall anchors - if the vanity will not be screwed to wall studs (C)
• Silicone (optional) (D)
Estimated installation time: 2-1/2 hours (including removal
of old vanity if applicable)
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra
precautionary measures to ensure a secure grip on the vanity
base and top when lifting.
CAUTION:
• The bathroom floor and wall must be finished prior to
installation of the vanity base and top.
• Do not use water that exceeds temperatures of 140°F/46°C.
• Do not place any sharp or abrasive objects on the bare
surface of the vanity top.
Faucet and drain not included.
Matte white model
Graphite gray model - 30320
34"W x 33-1/2"H x 18-7/8"D
Base (x 1)
Bumpers (x 4)
WINDSOR VANITY BASE AND TOP
INSTALLATION INSTRUCTIONS
Matte white
Graphite gray models: 30319, 30320, 30321
- 30313
Knobs (x 7)
1" screw for
door (x 1)
13/16" screws for
drawers (x 6)
Sink (x 1)
A
CARE & MAINTENANCE
• To maintain the beauty of the furniture finish, avoid placing
the vanity in direct sunlight.
• Avoid exposing the vanity to extreme temperatures by
installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the vanity base
immediately with a clean, soft and dry cloth.
• Clean the vanity top only with non-abrasive cleaners or
mild detergents - do not use powder cleansers.
For extremely stubborn stains, use a small amount of
acetone on a cloth and gently rub out the stain.
models: 30312, 30313, 30314
Matte white model
- 30314
Graphite gray model - 30321
41-1/2"W x 33-1/2"H x 19-7/8"D
13/16" screws for
Base (x 1)
Bumpers (x 4)
Sink (x 1)
B
D
C
Knobs (x 8)
1" screws for
doors (x 2)
drawers (x 6)