Advertisement
Quick Links
Owner's Manual
FRONT BUMPER
Model Nos. 486.245994, 486.245981
Fits 917 Series LT/YT/GT Tractors
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and
Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com
PRINTED IN U.S.A.
®
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
• Safety
• Assembly
• Operation
• Maintenance
• Parts
FORM NO. 40866 (09/04/07)
Advertisement
Related Manuals for Craftsman FRONT BUMPER 486.245981
Summary of Contents for Craftsman FRONT BUMPER 486.245981
- Page 1 Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.craftsman.com PRINTED IN U.S.A. ® DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 STOP •...
-
Page 2: Warranty
Sears store or other Craftsman outlet in the United States for free replacement. - Page 3 INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS STEP 1: (SEE FIGURE 2) A" and verify that all parts • Open parts bag labelled " are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. STEP 2: (SEE FIGURE 3) •...
- Page 4 STEP 5: (SEE FIGURE 6) • Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. • The bumper has three mounting holes. The rear hole provides the most clearance while the forward holes provide a neater appearance.
- Page 5 INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS STEP 1: (SEE FIGURE 2) • Open parts bags labelled " A" and "B" and verify that all parts needed are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. NOTE: Not all hardware will be used.
- Page 6 STEP 3: (SEE FIGURE 4) • Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for second plug. STEP 4: (SEE FIGURE 5) • Remove any bolts present in front mounting holes in side of tractor frame.
- Page 7 STEP 5: (SEE FIGURE 6) • Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. • The bumper has three mounting holes. The rear hole provides the most clearance while the forward holes provide a neater appearance.
- Page 8 Get it fixed, at your home or ours! For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.