Download Print this page
MAGICKWOODS Elements 30140 Installation Instructions

MAGICKWOODS Elements 30140 Installation Instructions

Springstead mirror

Advertisement

Available languages

Available languages

Quick Links

Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday
PACKAGE CONTENTS
MODEL 30140:
24" W x 2" D x 30" H
Mirror (x 1)
2" screws (x 2)
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra precaution-
ary measures to ensure a secure grip on the mirror when lifting.
CAUTION:
The bathroom wall must be finished prior to installation of the
mirror.
INSTALLATION
24" mirror shown in illustrations
1: 1) Determine the desired location of the mirror. 2) Mark the location of the mounting screws on the wall, ensuring that they are level.
Figure 1. It is recommended that the mirror be installed to at least 1 wall stud. In order to locate wall studs, you can use a stud finder
or tap along the wall until you find a spot that sounds solid. If you are unable to locate a wall stud, it is recommended that you use wall
anchors (B - not included) to secure your mirror.
2: If using wall anchors: using a drill, create a hole in the wall for each wall anchor over the marked locations. Insert (x 2) wall anchors
(B). Insert (x 1) 2" screw into each wall anchor.
If installing directly into wall studs: using a drill, insert (x 1) 2" screw into each marked location. Figure 2.
3: Hang the mirror on the screws using the mounting hardware preassembled to the mirror. Figure 3.
or e-mail: contactus@magickwoods.com.
MODEL 30141:
42" W x 2" D x 34" H
Mirror (x 1)
2" screws (x 2)
CARE & MAINTENANCE
• To maintain the beauty of the mirror finish, avoid placing the
• Avoid exposing the mirror to extreme temperatures by installing
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the mirror immediately
SPRINGSTEAD MIRROR
INSTALLATION INSTRUCTIONS
PREPARATION
Tools required for assembly
(not included):
• tape measure
• electric drill with #2 drill bit (A)
• level
• (x 2) wall anchors - if the mirror
will not be screwed to wall studs (B)
Estimated installation time: 1/2 hour
mirror in direct sunlight.
away from heat and air vents.
with a clean, soft and dry cloth.
Models 30140, 30141

Advertisement

loading

Summary of Contents for MAGICKWOODS Elements 30140

  • Page 1 SPRINGSTEAD MIRROR INSTALLATION INSTRUCTIONS Models 30140, 30141 Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday or e-mail: contactus@magickwoods.com. PACKAGE CONTENTS PREPARATION MODEL 30140: MODEL 30141: Tools required for assembly 24” W x 2” D x 30” H 42”...
  • Page 2 Figura 1 Figura 2 Figura 3 TROUBLESHOOTING Problem: Possible Cause: Corrective Action: Mirror is higher on one side than 1) Mounting screws are not level. 1) Remove the mirror from the wall and re-check the other. 2) Hanging hardware on the the screws;...
  • Page 3 ESPEJOS SPRINGSTEAD INSTRUCCIONES PARA LA INSTALACIÓN Modelo 30140, 30141 ¿Preguntas? Llame a nuestro Departamento de Servicio al Cliente al 1-855-995-5578, de lunes a viernes de 8:30 a.m. a 5 p.m, hora estándar del Este o escríbanos a contactus@magickwoods.com. CONTENIDO DEL PAQUETE PREPARACIÓN...
  • Page 4 Figura 1 Figura 2 Figura 3 SOLUCIÓN DE PROBLEMAS Problema: Causa posible: Solución: Un lado del espejo ha quedado más 1) Los tornillos para colgar el espejo 1) Descuelgue el espejo de la pared, vuelva alto que el otro. no están a nivel. a comprobar la posición de los tornillos y 2) El gancho de colgar de la parte ajústelos si es necesario.

This manual is also suitable for:

30141