Page 1
4’x4’ Poly Panel Assembly Instructions PN 10851 - Gray 4x4 RECOMMENDED TOOLS PN 10861 - Tan 4x4 PN 10850 - Gray 1x4 PN 10860 - Tan 1x4 Cordless Drill Screwdriver (Phillips) Work Gloves Part Number Description Qty. 10850/60 Gray/Tan 1’x4’ Poly Board...
Page 2
4’x4’ Poly Panel Assembly Steps Remove all Poly boards (A) from wrapping. Lay out each 1’x4’ board parallel to each other face down. Spacing between each board is approximately ⅝”. Spacing will be pre-determined by the hole placement in the Stringer Angle (B).