ENGINEERED QUARTZ SINK
Installation & Care Instructions
CA344SB24
-B
BEFORE YOU START
• Cahaba recommends that all engineered quartz sinks be installed by an
experienced, professional installer.
• IMPORTANT: The enclosed cutout template will create a countertop opening
with a minimal (1/8" or less) reveal. It is recommended that you discuss this
with your installer and agree that this finished appearance is the desired effect.
Cahaba is not responsible for improper sink or countertop installations.
• IMPORTANT: The cabinet must be installed, secured, plumb, and level. Failure
of this step can lead to product damage.
• Cahaba engineered quartz sinks should only be fastened to a solid surface
countertop (i.e. engineered quartz, Corian
• Cahaba is not responsible for sink or countertop if damaged during installation.
Be sure to inspect the sink for damage prior to beginning installation.
• Metal edges may be sharp – use caution when handling.
• Follow all local plumbing and building codes.
FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.
©2018 CAHABA. ALL RIGHTS RESERVED.
CA344SB24
-M
or Silestone
).
®
®
FOR MODEL NUMBERS
CA344SB24-B (Onyx Black)
CA344SB24-M (Mocha Brown)
RECOMMENDED TOOLS
Tape Measure
Safety Glasses
Painter's Tape
Level
Framing Square
Pencil (not permanent marker)
Shims or Cabinet Fillers
Denatured Alcohol
Rubber Mallet
Phillips Head Screwdriver
1 ¼" Hole Saw (for faucet holes)
Clamps
Silicone Sealant
Screws (recommended by
countertop manufacturer)
1