Sealey VS8111 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
1.1. GENERAL SAFETY
Always perform automotive testing in a safe environment.
9
Keep your work area clean and well lit.
9
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
9
Operate the tool in a well-ventilated work area.
9
DO NOT operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
8
DO NOT use the tool around corrosive chemicals which can damage the tool.
8
DO NOT abuse the flexible cable. Never use the flexible cable to carry the tool.
8
DO NOT drop the borescope, it is not shock proof.
8
Keep bystanders and children away while operating the tool.
9
Keep the tool dry, clean, free from oil, water and grease.
9
WARNING: The handheld display unit is NOT waterproof.
‰
Handle the borescope with care. If it is dropped, check for breakage and any other conditions which may affect its operation.
9
DO NOT immerse the imager head and cable into corrosive substances, petroleum or oil.
8
DO NOT use near moving machinery.
8
DO NOT use excessive force to insert or withdraw the imager head or cable.
8
DO NOT use the tool while tired or under the influence of drugs, alcohol, or intoxicating medication.
8
DO NOT use the tool for personal or medical use in any way.
8
1.2. CHARGING SAFETY
Use only the supplied charger.
9
Disconnect the charger from the electrical supply when not in use.
9
DO NOT charge in an explosive atmosphere or in the presence of flammable material.
8
DO NOT exceed the maximum charging time.
8
1.3. The warnings, precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
2. INTRODUCTION
High performance handheld borescope with 60mm colour LCD screen and waterproof probe pod with IP67 rating. Features video record/
playback and still images. Videos and images are stored on a micro SD card (not supplied). 2600mAh Battery capacity allowing up to 10 hours
working time. Kit includes 45° mirror, hook and magnetic pick-up. USB Charging cable supplied.
3. SPECIFICATION
Model:
Camera Probe Length:
Camera:
Mirror Flip/Rotate Function
Pod Length:
Power Source:
Record Function (Video + Still)
Screen Resolution:
Screen Size
SD Memory Slot
Viewing Angle:
Accessories
© Jack Sealey Limited
Ø8MM CAMERA VIDEO BORESCOPES
VS8111, VS8112
MODEL NO:
VS8111
2m
Ø8mm
Yes
50mm
2600 mAh Battery
Yes
1920 x 1080
60mm
Yes
178
0
45 Mirror, Magnetic Pick-up and Hook
0
Original Language Version
VS8112
10m
Ø8mm
Yes
50mm
2600 mAh Battery
Yes
1920 x 1080
60mm
Yes
178
0
45 Mirror, Magnetic Pick-up and Hook
0
VS8111, VS8112 Issue 1 11/08/21